StarTech Lawn Royalty Jul 24, 2022 #4 Did you make the calipier pins are free. And did you make the necessary adjustment?
hgw1956 Forum Newbie Jul 24, 2022 #5 StarTech said: Did you make the calipier pins are free. And did you make the necessary adjustment? Click to expand... Yes
StarTech said: Did you make the calipier pins are free. And did you make the necessary adjustment? Click to expand... Yes
StarTech Lawn Royalty Jul 24, 2022 #6 Strange yopu should been to tighten down the adjustment until the disc brake locked without any brake pedal pressure. You got both spacer rectangles in place too? Also verify the pads are .280".
Strange yopu should been to tighten down the adjustment until the disc brake locked without any brake pedal pressure. You got both spacer rectangles in place too? Also verify the pads are .280".
hgw1956 Forum Newbie Jul 24, 2022 #7 StarTech said: Strange yopu should been to tighten down the adjustment until the disc brake locked without any brake pedal pressure. You got both spacer rectangles in place too? Also verify the pads are .280". View attachment 61692 Click to expand... Will double check all this. I know the pins were seized, and the whole thing was rusted badly. Will verify everything. Thank you.
StarTech said: Strange yopu should been to tighten down the adjustment until the disc brake locked without any brake pedal pressure. You got both spacer rectangles in place too? Also verify the pads are .280". View attachment 61692 Click to expand... Will double check all this. I know the pins were seized, and the whole thing was rusted badly. Will verify everything. Thank you.
StarTech Lawn Royalty Jul 24, 2022 #8 Yes tend rust and corrode pretty bad at times. I usually ream out the pins two mounting with a 5/16 reamer and apply a little anti-seize compound.If the pins are fairly rusted I just replace them.
Yes tend rust and corrode pretty bad at times. I usually ream out the pins two mounting with a 5/16 reamer and apply a little anti-seize compound.If the pins are fairly rusted I just replace them.
