22hp Twin - governor shaft bushing placement

[ILENGINE]

Not the greatest picture but may be able to blow it up and see how everything is sitting

Amazon.com : Briggs & Stratton 796307 Engine Sump Replaces 699747/796230 : Lawn And Garden Tool Replacement Parts : Patio, Lawn & Garden

Amazon.com : Briggs & Stratton 796307 Engine Sump Replaces 699747/796230 : Lawn And Garden Tool Replacement Parts : Patio, Lawn & Garden

a.co

 

[shre74]

Ok,
I have the seal "seated", now I am looking at the shaft itself "internal" where the e-clips are attached...does the shaft sit on that place-holder with a bushing or does it sit in there with no bushing?

Thank you, when I get home at 345, I'll take better pics

 

[shre74]

Not the greatest picture but may be able to blow it up and see how everything is sitting

Amazon.com : Briggs & Stratton 796307 Engine Sump Replaces 699747/796230 : Lawn And Garden Tool Replacement Parts : Patio, Lawn & Garden

Amazon.com : Briggs & Stratton 796307 Engine Sump Replaces 699747/796230 : Lawn And Garden Tool Replacement Parts : Patio, Lawn & Garden

a.co

Nevermind... I see your attachment.Thank you.I appreciate it

 

[bentrim]

From Repair Manual 273521TwinCylinderOHV

Install Governor Shaft Bushing
Lubricate new bushing and governor shaft with engine oil.
1. Assemble governor shaft to sump to act as a pilot for
bushing.
Do not install lower E-ring.
2. Using Tool #19129 press in bushing until it bottoms,
Fig. 13.
3. Install lower E-ring.
a. Install new oil seal.
Governor shaft must rotate freely.