BOB'S small engines
Forum Newbie
Mower doesn't run have spark what are the timing marks are they still dot to dot
2018 murray mower with 4.50 e series
- Thread starter BOB'S small engines
- Start date
they should be dot to dot still, Did you check the flywheel key?
what the engine model number?
what the engine model number?
BOB'S small engines
Forum Newbie
I have the timing marks set at. The. The flywheel key is fine I had the engine apart everything looks good Highmark set dr. It has the plastic cam
BOB'S small engines
Forum Newbie
When I try to start it I heard some mild popping through the car it has plenty of spark I checked the Piston the Piston is fine
BOB'S small engines
Forum Newbie
Yes overhead value I checked the clearance is st at 6 on in tr make and exhaust
It is possible for the coil to be on upside down.
Try flipping the coil over.
Try flipping the coil over.
BOB'S small engines
Forum Newbie
I'm 100% positive coil is correct , my cam has the compressing release on it and working properly but hard to get proper compressing reading
People have said that before too, and turns out the coil was on upside down.