2011 JD Z425--54-inch Zero turn. sale it or part it out?

Go to You tube look up Taryl fixes all on how to fix the valve guides that have moved in the head. Have a friend who says he never gets the push rod out of the engine. Says he has one with three in the pan now and they never have caused an issue. I had one that lost the push rods and pulled the pan to get them out. One was laying on top of the cam gear that looked like a paper clip. Have one now that I am going to try and fix it similar to what Taryl says.
Have had at least 3 push rods drop into the engine crankcase over the years. Never fished or got them out and as far as I know, never had a problem with engine as a result.
 
You don't seem to think that $300-400 is enough.
Now you have a bunch of new parts on a broken mower.
Replace the old parts and sell it for whatever you can get for it.
Sell the new parts as a bundle.

Your other choices are essentially, fix/replace the engine or call the local scrap guy.
 
I have a Z445 with the 27hp Briggs. I was faced with trading it in, or having several hundred dollars worth of repairs done. They don't make the four series anymore. The five series was too much and the three series wasn't enough. It was $4,200. So I decided to have it repaired $1,600 vs $4,200, and I am glad I did. New starter, steering dampers, steering bushings, deck and drive belts. The engine has about 800hrs on it, and it's 15 years old runs and mows like a new one.
 
value is going to be a willing seller and a willing buyer. You are 1/2 the equation. Its value to you may be more than its value to a buyer. Put a for sale sign on it and what price you want. Put it in a place you can watch it and people nearby can see it. I will say that a couple years ago I was looking for a used rototiller for the garden. People wanted $800 to $1000 for a broken old unit. Eventually I found a like new one for $225 where the people were moving away. Last week I saw some of the used ones that had been priced at the unreasonable prices relisted as "free I want it off my property." In this economy they aren't even worth that with the price of a battery, new tires, new carb, new fuel tank etc., from sitting dead and in the weather a couple additional years. They are not even worth scrap because the metal recyclers around here will no longer take that stuff. It has to be disassembled, and cleaned first. Someone has to put $150 in time into it still to get $10 for the scrap metal. So, I would say make your mind up what price you want, put it up for sale and take the first reasonable offer you get. Don't trap yourself as a buyer who can't sell it because you constantly question if you could get more for it but you aren't willing to fix it. That can go on until the day you die.
 
Last edited:
Back
Top