1440 electric PTO clutch

[Lee Pichan]

The PTO clutch started smoking when it wasn't engaged and now stays on (blades engaged) all the time. Measure 0 ohms across the inputs to it. So would a "shorted" PTO cause this condition, or could the bearing on the housing gone bad causing the smoke and noise?
thanks for any input.

 

[Auto Doc's]

It's toasted, the magnet coil is melted down. It was likely noisy for quite a while has the bearing failed.

 

[Lee Pichan]

Thats what I was thinking. Thanks,

 

[hlw49]

Look up the clutch do a google search on it found one for less than $100.00