mower

Just wanted to know opinions concerning parts sourcing. I occasionally work on mowers and usually the focus is on the mower deck: spindles, pulleys, belts, etc. I've ordered original equipment replacement parts and parts from Amazon. I do not really see a difference and have not had any failures...

Hi I have a husqvarna yth1842 with a B&S 18.5 intek engine(33R777-0003-G1) I put new pulleys and spindles on it last week, it was running and mowing great until Sunday and it just died while my Mom was mowing. Now it won't start,it turns over but when it kinda cranks it sounds like a small...

Does anyone know what the part number for this bolt/pin is? There is suppost to be one on each side of the mower deck and it holds the back side of the deck up. I need to buy another one because the person that gave me the snapper mower lost one of the pins. Let me know if the picture of the...

Hey was just looking for some recommendations on a new 0 turn mower. My old Craftsman tractor/mower finally broke after 20 years. But was looking for a new 0 turn mower kinda leaning towards the hustler raptor xl but any suggestions would help thank you.

While mowing today, the mower (Model 3661 with powerfold) just quit. Tractor was running fine. Checked the torque on the blades and it was correct at 55 pounds. Checked the PTO 10 amp fuse and it was ok but I replaced it anyway. As I quit working on it I noticed the light switch was on but the...

I had the good fortune, maybe the misfortune, to acquire a Troybilt sickle mower. Actually looks new. Story is it was purchased and never used and left in a shed for years. Story does match appearance of the unit related to paint finish throughout, all labels and decals, tires, cables...

mower with autochoke runs for 3-5 min and then stops?? i cleaned the carb and linkage.

I have a totally rebuilt Dixon mower for sale, whole or parted out. I got curious about these mowers, their propulsion system, and history and ended up restoring this 30". Shipping the complete mower is probably a reach but i would entertain parting it out for shipment that way.

delete

So. I have a Craftsman Riding mower and its rear differential won't unlock and I need to move it from where it currently is. But the rear differential will NOT unlock at all! it shifts and the neutral lock moves but doesn't work. Please help me quickly. Thank you!

I am going to buy a new mower but looking for something that goes forward and reverse with the foot pedal and not having to do anything else like my old Murry, is there such a thing out there anymore ? Thanks

I have a John Deere D125. 9 years old. About 250 hours on it. It broke the deck belt. I replaced the PTO cable as old one was stretched. I replaced the housings over the deck pullies because belt wore threw right side cover. I replaced left spindle bearings because they were little noisy...

When I use our Honda gas mower to mow the lawn (dry), grass does not sick to the periphery of the inside of the mower. But when using our Ego electric mower, the grass does adhere. This causes clumps of grass to fall on the lawn. I've cleaned the inside and made sure it was dry, but the...

Looking for recommendations on keeping grass build up under my 54” deck. I have heard of a product call Slick Plate has any one used this or something like it.

I'm looking at an older Bolens tractor with 11hp Briggs, tractor looks ok but it's missing the mower deck. Wondering if these tractors need a specific Bolens deck or if another brand could fit instead!?

My 54 inch Bad Boy MZ Magnum zero turn riding mower quit on me. It's model BMG5425KO. I turn the key and it just clicks. Battery is good. When I jumped/shorted the starter solenoid, it cranks. I thought it might be a bad starter solenoid, so I replaced it since I had a spare one. Still nothing...

Push mower built from 5 different mowers . Long before string trimmers and those weren't needed with this mower . It would suck tall grass / weeds from a fence . The only part new was the blade . The reason it worked so well was the deck was a donut looker , the blade missed the deck edge by...

I have an old Toro Recycler 22 inch self propelled mower. it runs great but the handle bar is way to low. I'm hunched over while using it. Does anyone have any ideas for the best way to fix this? I considered cutting the bars and rewelding them up at a slight angle, but it's a pretty janky...

For fuel do you check in the carb throat somehow or just check the plug? And is it enough to use carb cleaner to just get it popping a few revolutions to confirm you have spark?

I was mowing, everything worked great. Suddenly the PTO mower disengaged, quit cutting grass. So I rode the mower back to the driveway, which is about 50 yards from where the mower deck quit. I checked to see if something out of order. I tried to restart the Toro, only clicks at the starter...

I purchased a new B&S 163 cc engine a few months ago, and I'm finally getting around to installing it. I don't know how to get the belt pulley off Can someone help?

My transmission part number is 589600601. On the shaft that the wheels connect to, I see evidence of grease on over half of the outside of the black case. I'm not sure what signs to look for that the transmission might be on its way out.

I have replaced the alternator/stator, voltage regulator, ohm the wiring all check good, 32 Volts ac coming out of Stator, 1-3 volts dc coming out of regulator. any help? Briggs and Stratton 23hp vtwin

52” Gravely Pro-Stance mower with loss of power, to the point of almost stalling, after engaging the mower blades. Its got a 19-HP Kawasaki engine. The mower is non-commercial. I only use it to cut my lawn once a week. Gravely started manufacturing this model Pro-Stance mower in 2006...