Used mower. The left wheel is a little more worse camber than the right.
It doesn't appear that the drag links or spindles are bent. I did notice the spindles move around in the axle much like a worn ball joint on a car. I am working off of page 12 of this parts list.
http://service.webec.husqvarna.net/...nNAes/HUSI2012_NAenNAes_LGT2654_581540027.pdf
I ordered a pair of #7 and #8. Gee, they are only washers.
When I took the spindle off, I found a plastic (PLASTIC?!?) bushing at the top of #2, front axle assembly not in the IPL.
I ordered these. Are these correct? They don't really match per picture but the part number is right.
https://www.ebay.com/itm/Set-of-4-B...e=STRK:MEBIDX:IT&_trksid=p2060353.m2749.l2649
Are there metal (perhaps brass) replacements?
On the bottom of the axle it appears that there is a bushing that goes into the axle that is worn, also does not appear to be in the IPL.
Here's a pic.
Does this come out? I was thinking of driving it out from the top and putting another in.
If it does come out, is this the replacement?
https://www.allmowerspares.com.au/husqvarna-front-wheel-bush-532-12-49-59.html
Or am I looking at replacing the axle assembly?
Any other tips to upgrade the steering on this thing?
Thanks so much for your help!
It doesn't appear that the drag links or spindles are bent. I did notice the spindles move around in the axle much like a worn ball joint on a car. I am working off of page 12 of this parts list.
http://service.webec.husqvarna.net/...nNAes/HUSI2012_NAenNAes_LGT2654_581540027.pdf
I ordered a pair of #7 and #8. Gee, they are only washers.
When I took the spindle off, I found a plastic (PLASTIC?!?) bushing at the top of #2, front axle assembly not in the IPL.
I ordered these. Are these correct? They don't really match per picture but the part number is right.
https://www.ebay.com/itm/Set-of-4-B...e=STRK:MEBIDX:IT&_trksid=p2060353.m2749.l2649
Are there metal (perhaps brass) replacements?
On the bottom of the axle it appears that there is a bushing that goes into the axle that is worn, also does not appear to be in the IPL.
Here's a pic.
Does this come out? I was thinking of driving it out from the top and putting another in.
If it does come out, is this the replacement?
https://www.allmowerspares.com.au/husqvarna-front-wheel-bush-532-12-49-59.html
Or am I looking at replacing the axle assembly?
Any other tips to upgrade the steering on this thing?
Thanks so much for your help!