Hello: I recently purchased a used Series 6 Snapper rear engine mower to use in the cemetery in I manage. I have a newer Series 28 that I've used at home for years so I'm familiar w/ these mowers. One concern I have is that I am not able to smoothly shift the mower when I have the clutch/brake cable all the way to the floor. The machine shifts fine when the pedal is 1/2 of the way but I would like to have it come to a complete stop before shifting. There is a fair amount ( in excess of an inch -inch and a half) of slack in the cable before the clutch is engaged. I believe that with the brake fully engaged , the mower should shift gears easily. I'm assuming the cable needs to be adjusted . Any thoughts / suggestions on how to solve this problem would be greatly appreciated.Thank you. Zackary.