Search results

Results 1 to 11 of 11
  1. C

    In trouble yet again.

    Thank you Ilengine and Keakar, once again you have come to my rescue. I appreciate your help. Ron
  2. C

    In trouble yet again.

    I am back for further help. I am not knowledgeable in working on engines but trying hard to learn. I have received substantial help from the forum, which I really appreciate. The help I received has helped me to progress. My latest issue is: I am replacing a camshaft on a Craftsman with a...
  3. C

    Carburetor

    Bertsmobile you are a star. I removed the carburettor and took off the float and needle. Just as you expected there was a small piece of muck at the base of the needle stopping the float from closing. Muck removed and a good clean followed by reassembling the carburettor resulted in the mower...
  4. C

    Carburetor

    Thank you, Bertsmobile. I appreciate your help I will start on the carb tomorrow. Thank you again Ron
  5. C

    Carburetor

    Hello everyone. I removed the fuel pump to replace the starter on my Vanguard 16hp. When everything was reasembled all was well when I started the mower until I smelt petrol and noticed gasolene pumping out from the carburetor. This is where I show my lack of knowledge so to make it easier I...
  6. C

    Non-Starting - PCB problem?

    I have a Countax C600 with A Vanguard 16hp engine. The engine will not turn over, and there are no clicks. The problem started after I removed the fuel tank from the Countax. Despite clipping the fuel line, petrol succeeded to get on the PCB. After reinstalling everything, there was no response...
  7. C

    Intake Valve Not Fully Opening.

    Thank you for such a fast reply. I appreciate your help.
  8. C

    Intake Valve Not Fully Opening.

    Hello, everyone. I have a Craftsman with a Briggs Flathead engine Model 42E707. One of the intake valves is not fully opening. The valve is new and moves freely. The problem seems to be the valve lifter. When the valve is taken out, the tappet is loose and can be moved easily. When the valve...
  9. C

    Obsolete Carburettor.

    Thank you, I appreciate your fast reply. I will order the 693480. Again thank you for your help.
  10. C

    Obsolete Carburettor.

    Hi everyone I have a craftsman with a Briggs 42E707 163101 engine. The top body of the carburettor needs replacing. Unfortunately, the carb is pre 98020600 and is obsolete. The carburettor is the 3 screw mount. Will the four screw mount carburettor fit? It is the top half of the body I need -...
  11. C

    Fuel Lines - need help

    Hello, everyone, I am new to the forum and this is my first post. Hopefully, you could help me with the following problem.* I have a Craftsman 1997 hydrostatic Ride-on Mower with a Briggs and Stratton intel engine. The details of the engine are:* Model 42E707- 63101 and the year is 1997.* I...
Top