Search results

Looking for a deck housing to replace my current deck. If you have one or a lead please let me know. Thank you

I've got a 3 year old pole saw that I can't start. It has progressively gotten harder to start over the years. I put fresh gas in it today and it sputters like it's going to start but it just won't run. I bet the saw doesn't even have 2 hours total run time. Any suggestions as to what to...

I'm thinking by the looks of this the only way to adjust tracking is to loosen the stop nut on the linkage rod and turn the large nut to lengthen or shorten the rod- does anyone else know of another way to adjust? Both trans track backwards when in neutral. Any advice appreciated. Thank you

A friend of mine has a substantial oil leak, We see it dripping off the lower starter bolt about every 45 seconds one drip. He cuts a residential lawn that takes about 5 hours a week, he is using about 8oz oil per cut. The motor had so much oil all over it that it was difficult to really see...

I have a 10 year old RZ4219 and the smooth front tires won't hold air. They are a size 11x4.10-5. I see replacement tires and tubes in size 11x4.0-5. It's not quite the same size but close. Can I use the 4.0 tube instead of the 4.10 tube or should I just buy new tires or tire/wheel combos...

I drove the mower into the garage after the last cut a few months ago. I went to the shop today to replace the deck belt because it popped off during the last cut. After replacing the deck belt and starting the mower it would not move. I checked the neutral levers in the back, put them in...

I have a RZ4219 that has a problem with the right side not being as strong as the left side. When going straight on flat land it seems almost ok, but when I try to pull up a hill or push the right side steering handle forward I can tell that side transmission is not responding like it is...

I'm thinking of getting a ZT2 for my 1.5 acre yard. I have a lot of trees and obstacles plus some roots on top of the ground (one of them took out my Husqvarna RZ4219 deck with no front rollers.) I also have a ton of leaves that fall late in the year and watching a few videos online it looks...

I'm looking for a pulley fan for this pump - ZC-DPBB-2M5A-2WPX. When I go to the Hydro Gear website they show the pump OEM part id is 1403. Either way, I cannot locate the fan. I called a local dealer and he couldn't locate it. I got the pump # off the sticker on the pump. Any suggestions...

Has anyone replaced this? I cannot locate the part on any parts diagrams. My belt wore out and it bent a few of the blades as it jumped the pulley on the right side motor. I'm thinking I can cut the bent portions of the existing blades off and roll on, any reason I shouldn't? I cut about 1.5...

I'm having trouble figuring out how to replace the drive belt on this mower. I jacked up the back end and removed the deck belt. The drive belt looks like it cannot be removed unless the tensioner pulley/bracket is removed or the rear transaxle is lowered. Is there a trick to doing this? Any...

Does anyone know if you can add a hitch to this mower? I just want to pull a small tractor cart occasionally. It has a tubular rear bumper. Any advice? Thanks

Can anyone tell me if this is by design or is there something wrong with my mower? It has about a 2 second delay before it starts to crank when you turn the key to start the mower. Anything I should be concerned about? Thanks

I first noticed it in high gears, now it does it in all gears. Seems to slip like the teeth on the transaxle gears are stripped, but I opened the case and all the teeth look good, axles are staying in place. The chain seems like it might be a little loose but not enough to cause the trans to...