Search results

I've trash picked a Lawn Boy 10323 Duraforce commercial. Its missing the rear wheels and needs cable replacement, but the worst part is that the connecting rod is broken. If anyone out there either has the parts or can point me in the direction of where to get a rebuild kit or a rod and piston...

WTB Muffler for Briggs and Stratton 18HP OHV engine. 31H7770297 E1

Broke yet another one of these starter cups. (#1 in diagram) The clutch looks just fine to me, but now I notice the starter rope rotor has damage most likely caused by this whole mess. (#8 in diagram) - I'll replace that. According to the diagrams I've got everything installed correctly and now...

Stihl FS80 Trimmer. When the starter rope is pulled it spins freely. Upon inspection I noticed the pawl and carrier were damaged. The nut in the middle was separated from the rest of the cup. So i replaced the whole assembly and after 1 session of use the same thing happened. Clutch carrier...

Looks like something is supposed to be bolted up to those 2 holes. What is it?

Pi9cked this old horse up a few days ago. Kohler 8hp horizontal shaft engine has compression, tires hold air and it's not missing any parts, except of course the cutting deck. My plan is to first of all see if I can get it running later today. If all goes well, then I might repaint it later on...

Runs fine

This trimmer has been a real PITA. It starts on choke but once the trigger is pulled it bogs down and dies. I've already gone through and cleaned the carb and the primer bulb is new so is there something I missed?

Solo backpack blower/sprayer.....agricultural use. Would start but not stay running. Cleaned carb and its good to go.

NFIG]24794[/ATTACH] The Craftsman trimmer had a flywheel with the exact same numbers and measurements so I got happy! But upon further review....the Inner Diameter where the crankshaft goes through is actually smaller. Totally a let down. The trimmer was in bad shape from being left outside in...

Went dumpster diving today and found this Crapsman Trimmer. I know alot of times engines and parts are interchangeable across brand names so I'm hoping that the flywheel on this one will match the Ryobi we've been talking about. I'll take it apart later and tell you whats up. No plans on...

I'm doing a repair on this mower, brand new and already busting belts and the clutch cable is also broken. I'm trying to find out the exact part number for the clutch cable and what the correct length is supposed to be.

Thanks for offering to help. The difference in the currency makes it really expensive....$1 US = $2.70 Local for me. Add customs and shipping to dealer markups and you're almost paying 5x as much as you'd pay stateside. I'm comfortable waiting around for another one to go bust before spending...

It seems someone else worked on this trimmer before me and in the process they damaged the flywheel. Error on my part was assuming it was alright....anyhow the key slot on this flywheel was non-existent so whoever tried to fix it used a half moon key and forced the flywheel on. Which worked for...

Why does this happen? Even with a new bulb installed.

Working on a Ryobi 725R, had alot of issues and after addressing them all I'm stuck on the carburetor adjustment screws. Can anyone give me any pointers on how I should go about getting the correct settings so that the engine starts? Right now I'm hearing it pop but it just wont get up and run...

Re: return customers due to running their mowers intot the ground. I know exactly what you mean. The customers are their own worst enemy if you know what I mean. Here's one I just dealt with.....and the other is a brand new craftsman trimmer with a bad clutch. Replaced the springs and its good...

Motoman, the winding mechanism only allows me to turn anticlockwise, there seems to be some cogs on the spool that prevent you from turning it the other way. Nevertheless, i'll try installing the string in the opposite direction and bypass the wind and click system and see what happens. Here are...

My trimmer starts and runs perfectly, but the actual trimmer head or spool or whatever you want to call it has an odd issue. The string lengthens on its own! I mean there is no need to bump feed. Load with string, screw on the bump tip and start up first few seconds it works fine, after that the...

ISO Hydro gear 310-0500 trasnmission. Fits Simplicity Regent 1692403.

no sign of a low oil shut down on the crankcase.

Coleman Powermate 5000w with B&S 11 hp engine. 252412 0747 89080811 Got it to fire after several pulls, runs for about 10 secs and then shuts off and its hell to get started again. I've already installed new head gasket, cleaned carb and replaced fuel lines and fuel filter, along with a new...

Happened to pass by an Estate Sale today and found this little number for $30. I've only ever seen pics of these online and never in person. Its rare in my part of the world and so I'm asking for assistance. Would like to get it up and running, but have no idea of engine model or anything for...

Hey guys, I'm having trouble assembling the trigger and handle in an FS80 Trimmer. Anybody got a diagram? Or at least some advice?

Instead of buying the headlight assembly for this Regent I decide to just make one. I wanted to retain the stock light placement since even though its a custom touch it won't look too different to the way it was originally. Note well, be careful of the wattage rating on the bulb cause it eats...

Wire coat hangar and some 1/2 inch pvc pipe and fittings I had laying around. Works perfect, hang anywhere and go. BTW thanks for the idea of clipping spare trimmer line to the machine:thumbsup: I've already followed suit!

Regent Hydro 12 1692403 with cutting deck 1692366 Trying to get my hands on the deck lift assembly. The arm that connects on the underside of the tractor itself. Mine got damaged.....will post exact pics of what I'm looking for later. If anyone has a used one and doesn't mind selling to me I'd...

Today I changed the fluid in my Regent Hydro and in the process the vent plug broke. I am reaching out to you all in the hopes that someone might just have one laying around and is willing to give away or sell. This vent thing comes in 3 pieces. The top vent, the tube and then the threaded end...

Regent Hydro 12 with mower deck 1692366. When mowing deck engaged I notice that the belt tends to 'whip' as it moves around. Why is this happening? Is it supposed to?

I need help understanding exactly how to install the spring in those pull start assemblies. Any tips or videos are welcome.

I need a muffler for my regent hydro 12 model 1692403. It's part number 1655848. Kinda pricey new, so I'm wondering if anyone has one and would be willing to sell or if you know of other mufflers that can be substituted. Really appreciate the help. GrassBandit

In really rough shape the day that I picked it up.