Search results

I bring mowers back to life as a hobby. I need to find a part number for the 25mm version of 753-0609 which is the 22mm style. Thank you for your time sirs.

Running RPM's please not max.

What should be the running RPM's on the above Briggs motor please. It's on a Toro 21564 mower 2025 model. Thank you for your answer.

I have a HRR216 2SDA that i can't find the throttle cable unit part number for. Thank you for helping me.

Can the aluminum column shaft be straighten if it gets a mild bend from being stepped on ? ECHO 225 weedeater.

I found the problem everyone. I removed the carb and discovered the throttle butterfly blade had some how come slightly loose and jammed in the throat of the carb. That severely limited the ability of the throttle to move via the governor. Thank you all for suggestions.

Thank you for your help. I had to order 3 of them before I got one that would rewind after starting mower.

I'm finding conflicting part numbers for the safety cable. Can you help ? Model L2821 Model 961430132 00 Super clean mower in Greenville SC. I didn't know Jonsered made mowers.

I have a fresh roadside pickup self-propelled that has a 3700 rpm that I cannot change. Bending the govnor throttle spring tab does not change the rpms hardly at all. I removed all the metal covers to clean the area where the governor goes inside the case but nothing changed. Ideas o wise ones...

I have all ready pulled the tin while checking the flywheel key and blew out the area. The choke vane moves smoothly and activates the choke mechanism smoothly. Update:::: I pulled the air filter off and the engine sped up alot. There is a mist around the throat of the carb . I think the...

I have a briggs based self-propelled walk behind mower that when you start the engine it just goes putt......putt......putt......putt......putt for up to 15-20 seconds before it dies. I can start it up again and does the same bearly running thing. Throughly cleaned the carb twice and new plug...

This is the only numbers I can find on the entire push mower.

Anyone know what the part number is for a Powermore 173cc recoil unit or maybe a trick to repairing the 3 tiny factory welds between the thin metal plates ? Thanks in advance for your help.

Why do some primer bulbs have the hole in the middle and others do not ?

Is this the way a used thermo wax plug should look with stuff oozing out around it?

I have a 92902-3300-02 that needs a dip stick. When I look up the part, 66768, it has no long shaft to reach the oil level.

Here is the only numbers I can find. This is the metal u shape that holds the carb.

I believe you have solved the code and I learned something new. Thank you sir.

No numbers on block. There is a MAR 16 12 below the engine number though.

Sorry, pushmower.

I looking up a carb for a mower and it gives two different carbs part numbers. The note says "use before code date or after code date" where do I find this code date please.

neighbor has a bent crank shaft. Are all Honda 160 engines on walk behind mowers interchangeable? Same shaft length and diameter?

72511-VA5-J00 is the blade number i believe. Is the any other part numbers that will also fit. Thanks in advance for your info.

I need a 640288 carb alternative part number for this current Tecumseh I picked up. Runs on starter fluid but the insides of carb are to badly corroded to fix.

I'm doing a engine swap and need a 7/8 shaft blade adapter with 4" top to bottom length to get blade closer to bottom edge of deck. Any part numbers oh wise ones.

Briggs 100602-121-B1 engine with 4800 rpms. How to adjust the rpms down to 3100 range. All the carb linkages move smoothly. Thank you in advance oh wise ones.

I need to get a discharge chute for a Troy-bilt that the model ident tag sticker is missing. The sticker on top of plastic cover gives no info that is usable. Any ideas oh wisemen?

247-289050 model. We neighbors are confused. We replaced a split transmission belt with the correct part number. Button up everything. Owner fired up mower and let the clutch out slowly. The mower did a massive wheel stand and took off to discover no brakes. Mower did not have this trouble...

I have a briggs motor on a power washer that is acting up . I can pull start the motor and do a project then shut it down. When I go to restart the motor the pull cord will not budge. I pull the recoil mechanism off and the pull cord pull nice and smooth. If I try to rotate the flywheel with my...

Can someone give me the torque specifications for the 4 headbolts on 093j02-0001-F1 Briggs motor please ? And torque pattern.

Anyone have a PDF copy of this MS-7862 booklet to share? The booklet is about testing coils.

Replaced the 2 gaskets and it's running perfect now. Thank you for your time.

I will look at that next. Thank you.

3BSXS.1581VG. 275738

Bowens 11A-584E765 mower. B&S 3BSXS.1581VG engine. You fire the engine up and after 10-30 seconds it starts a sporadic miss in the RPMs. The spark plug is on the sooty side of black.

I pickup a roadside Brute electric start walk behind mower. I went through carb throughly. Engines runs at 2700 rpm and sounds like it is struggling/rough not surging. The spark plug is sooty. I removed exhaust that made no difference. I put several ounces of Stabil Fast Fix in fuel as a long...

ACE brand has there HD30 on sale for $3.49 qt this month.

Husqvarna # 587358401. I'm being told the spring is special order and up to 8 months to get delivered due husqvarna warehouse issues. Anyone have a cross-reference for that spring to another brand? Trying to help a special needs guy get his mower going again. Thanks inadvance for answers.

I not finding any replacement for briggs 126602 0130 carb. I thought I would ask the experts if anyone has found a replacement carb that would work. I don't want to scrap the mower if possible. Thanks inadvance for your answers.