Search results

i have original dipstick. 2.1 is stated.

Generally, how many ounces in 50 hrs ?

“ The "W" in 10W-30 stands for "Winter," indicating the oil's viscosity rating in cold temperatures. “

Thinking about trying the Pro 50

Which Kawasaki oil would you recommend to lessen usage ? I’m using 10/30 but going to 10/40 next change.

Is it normal for this engine to use some oil between changes.

FX801V DS25. Does anyone know the actual capacity of this engine. I’ve heard different capacities. It has the original dipstick, not the updated version. I’ve been told 2.0, 2.1, and, 2.4. Sorry if I duplicated post.

Sorry, misinterpreted your post, I understand.

“ Leading us to what could be the main culprit, your fuel can spout. Is your can spout an old open type or do you have a new sealed one with o-rings? Spout on the right should be tossed in the trash. One in the middle is a good one.” What is the issue with the fuel spout ?

0736 or 0734 for FX801V ? I’ve got the 0736 on mine now and was told I had the wrong one. My grandson has theFR691V and according to Cub the FR691V uses the 0736 and mine uses the 0734. Just wondering if it made a difference.

Does it matter if the split flex line is below the oil drain hose ? I read somewhere it should be above it.

Next thing I’ve got to figure out is getting the 1” fitting out. Tight quarters. Thank you so much.

Gonna replace the KAW-92055-0892 o-ring. Do I need to put Teflon tape on the threads ahead of the o-ring ? Don’t won’t it to seep or leak,

Mower only have 28 hrs on it. Wonder when the KAW-670d2016 was superseded ? Mine is a 2023 model.

I’m wondering if that’s where my leak is. I tightened it and wondering about if there might be a o-ring issue. I can’t see anything else that might cause it. I already knew about the part you mentioned. Does that mean I need a new o-ring ?

Edited my post. Thanks

Cub Cadet ZTX6 with Kawasaki FX801VC66957. DS25. Noticed I have oil seepage around the area of oil drain fitting that the oil drain tube screws into. Not real bad but base of engine and under the fitting stays wet. I tightened and it may have slowed it some. Anyone else had an issue ? Thought...

Thanks

Do they make a front blowout baffle kit attachment that prevents grass from blowing out from the front of the deck

That’s what threw me off. Couldn’t quite grasp level side to side and then front to back. Video made more sense. He adjusted front to back on each side. No side to side. If the blades are equal front to back side to side should be.

I saw that too. I’ll give another go. Video helps. Thank you.

Sorry. Cub ZTX6 54” deck.

Already have that. Need procedure. There’s two adjustments on each side but none in the front to raise or lower. Side adjustments seem to contradict each other.

Is there anything available on how to level the deck on these mowers besides the manual ?

Yes sir. Voltage Regulator.

Thank you, didn’t realize that. Learn something new everyday. I have a ZTX6 Cub. No one can give me a definitive answer. I have a 54” deck. The center deck wheel is 1/2 -1/4” lower than the outside wheels set in the same hole. Is this normal. I thought all were relatively the same. Thanks

I’m sure the service dept. has access to one. Techs have to have something to go by.

Just saw this.

Where can I purchase a service manual for my ZTX6 zero turn mower.

I’m just wondering if that applies to my ‘23 FX801V-DS25

I saw that. Wonder if they updated amount.

Someone said it only applied to the 26 models. Not very specific.

FX801V-DS25 engine. Does the dipstick and extra .5 qts oil apply to this engine? I saw the bulletin.

Do you have the link for a ZT5000 ? I tried but couldnt find it. Thanks

Thank you. I hope I haven’t messed up buying this mower. I went from a ZTX5 Cub with a Kohler to a FX Kawasaki engine. Like the features better on the BonCat.

Don’t have a manual. Any instructions anywhere? Thanks

How do you adjust the deck on this unit? Where is the adjustment on the chains? Just bought one and I’ve went brain dead. lol

Which ZTX seat has the most rearward movement ? There are two different models. ZTX5 style and the ZTX6.

Anyone found the new carb tool for new Ruixing carbs?

Star Tech, I know the newer ones have the larger mixture screws. My older one has a Ruixing and I don’t like it at all. Which brand do you prefer, or, does it make any difference.

Anyone know what brand carb they’re using now? Ruixing, Zama, etc.

Looks like I’ll have to come up with something. Someone said Pacman tool might work. I’m going to replace them with the older mixture screws when I get these out.

I purchased a new OEM carburetor for my blower and noticed the carb adjustment screws are bigger. The splined tool I’ve been using is too small for the new carb. I have no idea what size splined tool I have. Anyone know what size the updated adjustment screws are, and what brand carb. Husqvarna...

Thanks, just purchased one from dealer. Fits the hole perfectly. Now looking for a hold down bracket.

ZT740, 25 hp engine. Looking for an alternative to replace junky OEM AGM battery. 1 1/2 yrs old, toast already. Heard several instances of the same thing.

Can’t download.Image is to large..Can someone tell me if the plastic headlight assembly is attaches to the top of the hood bracket, or, the bottom

Ok, thanks

This is the part assembly.

Need help installing a headlight assembly. How to install/reinstall the hood? Is it better to remove the front grill first? Is there a service manual available ?