Search results

I have no parking brake and 10 second delay before coming to a complete stop when in gear. I checked the brakes I least have half if not more left on the pads. How do you adjust them? 38618x92a

The engine, hood, and grille are gone. Seat is shot. Gas still good condition but needs another gas cap. Let know what you need. West Virginia

New points, condenser, and spark plugs. Turns over but wont start. Fuel pump isnt pumping fuel when pulling the hose off the fuel pump going to the carb. Wont even start on carb cleaner or pouring gas into the throat of the carb. Points set at .020. Any other ideas before I replace the fuel...

Model - H5050 7013 Serial - 08664886 This other number was the tag. A-28222. Briggs 130292 0159-03 73022807

Can someone put a model number to this self propelled electric start? Heres one thats not electric start 20606x92a.

I'm in need for a grille for this Murray rider thats not all broke and has working hinges. 42828x8b

Can someone put a model to this? 42 inch and 6 speed. The engine isnt original. I tried 42571x8a but gear shifter is on the left side. Mine is on right side.

Blade only rubs deck when pushing it to mow. Checked blade and its not bent. Same with crank. Blade doesnt rub when sitting still when engine is running. Any ideas or thoughts?

Will a 48in deck from a L120 fit on a L110?

I need help finding a owners/parts manual for this mower. Briggs 20HP Twin 460777 1876-a1 9701205B This all i could make out for model. 14aj844 Its a yellow yardman with hi and lo forward gears.

Whats preset carb adjustment on this saw that has the compression relief valve?

MTD/Sears 247.888500 Tecumseh HMSK85-155901A Broken connecting rod. Connecting rod marked the surface on the crankshaft when rod goes. Crankshaft 35980A No longer Available. Short Block 756325 No longer available. Can I clean up the markings on the crankshaft with emory cloth and put new...

I'm looking for the hydro lever with all the hardware, hydro lever plastic cover and a Kohler 17hp command engine and the 38in bare deck.

What other Bosch spark plug can use beside the HS8E. Bosch discontinued it as of 8/2011. It replaces the champion DJ8J that was used in the little Homelite XL-2 Chainsaws.

I'm looking for the hydro lever with all the hardware, Kohler 17hp command engine and the deck.

I could use some help on putting model to this snowblower. I also need a parts and owners manual for it also.

Does anybody know the part numbers for auger and drive belts? I looked on partstree and jackssmallengine but there not showing any belts. I have the owners manual and its showing belts and cables. Toro 724-38072-7900001 & up

I'm looking or a new or used booster fan. Part number is 212370. 16hp Lhead twin that goes on a Snapper LT16 series 2. 402437 0686-01 84121912

Need a starter pulley for Poulan 3700. Also need a 20 in bar also. 530010674 subs to 530026371 - NLA

I need help finding a 18in bar and chain for Homelite C 52. I looked in the oregon and sten catalog but didnt fine anything under C52. Oregon just has the C series listed as .404 pitch. Just a replacement bar is offered.

I need Snapper LT16 parts. I need decals, brake pedal assy with a other misc parts that go on it, headlight switch, seat, rear diff cover that goes in between the 2 rear wheels, PTO mounting hardware and wiring harness w/headlight wiring complete or parts harness. Also need the nuts and bolts...

I'm repainting a Snapper LT16 series 2 riding mower. Wondering which color red should I use?

Cub Cadet 1525 hydro, Kawasaki FH381V/FH430V Dad bought it at Lowes 10years ago. He always used the 10w-30 valvoline. I noticed oil consumption last year. So this year I put 30w in it instead and still having oil consumption. No signs of leaking oil. New spark plug this mowing season.

Does anybody know the compression spec is on 18hp Lhead twin Briggs, 422437,1209-01, 1988 model? Tested left cylinder at 30-40 but peaked 60 once. Tested right cylinder at 60-70 but peaked 90 once. I guess its time for rebuild.

Acquired a Snapper LT16 series 2 rolling chassis over the weekend with no engine. Needs a 16/18 Lhead twin hoz shaft. Gonna restore it and keep for myself. I have a old Sears GT mower that has 18 hp Lhead twin briggs on it thats still in good shape to resell. Should I keep looking for the...

Whats the resell value of rear engine rider where you live at? In my area I see the standard riding mowers with the engine in the front go for $300-$600 depending on brand name. But I havent seen whole alot of rear engine riders for sale.

I need a another wiring harness for my murray riding mower but I think its been discontinued. I was wondering if there murray similiar to it that I could use the harness from that will work on my mower? Murray 40702x92B Briggs 289707 0121-01 9705284D

917.272201 DLT I was wondering anybody has this Sears part #140189 so I can see what it looks like. Its a drive pulley but diagram is showing a metal sleeve with it unless its the crankshaft there showing. This mower has a PTO clutch. It came loose on the PO and bent the bolt. Some of metal...

I have a Homelite HT21. I wanna the ID and OD size for replacing the fuel line. I have 1/8 id x 1/4 od and 1/16 id x 1/8 od but there either too small or too big.

Can someone put model to this Poulan chainsaw?

Poulan/weedeater/featherlite cuts off when squeezing the trigger. Will stay running on idle longs I dont squeeze the trigger. I say its the clutch but others say its carb related. What do you guys think?

I need help finding parts listing/manual for a FR2.3 18in gas chainsaw.

I have ground problem on a 1988 mtd hechinger riding mower. I ran wire from neg post battery to the mounting bolt on ground plate on a 3 pole solonoid. Somehow the wire I ran touched the the little red wire when running the mower. I help running that wire again in a way where it wont touch other...

16.5 Lhead twin Briggs and G series/42in deck. 7 speed shift on the go. Someone changed the seat so no model number. How does the drag link go this riding mower? I'm talking about the rod that mounts on top the right wheel spindle and goes the steering gear. I think someone put it on where the...

Poulan Weedeater Featherlite, curved shaft. What the trick to take apart the string head spool to reload the string?

Briggs 120602-0131-E1 6.5hp ohv Let someone borrow this last year. Got it back with a bent blade. Nothing but trouble out of it ever since. Will start in 6 pulls with no blade but I hear noise like its sucking air when I'm pulling the cord. I can get to start with a new blade within 10 pulls...

When I turn the blades on they make alot noise and squeal real bad. the blades arent touching anything when they spin. I figure i need new blade spindles. Does anybody have parts diagram of the 46in mower deck? See no deck numbers on the mower 148-818-372-f228d 06-351514 1988 model hechinger/mtd.

422707 1105-01 9705125A 18hp Lhead twin Briggs Throttle lever on cable slides down on it own when its all the way up on fast.

Yes Here's pics on its wired up with new harness that put on it.

Replaced wiring harness, starter turns over when jumping solonoid but acts if the battery if half. Same with when jumping the starter with jumper cables directly. Removed spark plugs and engine spins like nothing holding it back. Took starter off and found corrosion and rust around the retainer...

Tecumseh Lev120-362001A. Mtd/Yardman self propelled Got this free last fall with a bent blade. Ran in fall with bent blade. Replaced blade and flywheel key this spring still no start. I have no spark at the coil using the Briggs spark tester. New spark plug. I also smell gas when trying to...

This past Sunday I bought a Cub Cadet 682 hydro with a kohler KT17S horz. twin cylinder engine for $25 running I guess. The PO said last summer when shut the engine off he smelled burning oil so he quit using it.

Fridgadaire M- pr185h42st S- 033100 c 012638 MFG ID - pr185h42sta 18.5 Intek Briggs, 42in hydro I got this not running. The PO pulled all pins out of the connector going the key switch. I'm unsure where the blue, double black wire and double black goes. Pins G, M, and B are still empty. I...

MTD 690 hydro 18hp Lhead twin Briggs All sudden engine spins with new battery from lowes than it wont spin at all. I have contunity at the blade and clutch switch both open and close. Tried 3 new key switches(MTD 925-0267). With one lead on the pos battery and the other on "S" terminal I no...

I got new wiring harness for a MTD/Hechinger and need hooking up that last 4 wires. Also I appear to missing a circuit breaker but sure where it would be if I have it. The connecting terminals on left wires also dont all fit on the soloniod too. Model is 148-818-372/F228D Picture #1 has pic of...

Model 247.37048.0 Wont Start I get solid green light not blinking on battery charger. I charged since yesterday afternoon and still nothing. What else could it be if it not the battery? A new battery is $150. Is it worth it?

917.255914 18hp L-head twin horizontal shaft I can jump it at the starter or the hot post on the solonoid and will turn engine over. But when I use key it wont turn engine over. The clutch switch is bypassed/spliced together. I cleaned green stuff of the key switch and rusty terminals on the...