Search results

ok i got the belt size it is a 1/2x35 1/4" belt for those that need to find one local in a hurry. i sent out a bunch of questions to online v-belt sites and most came back to me with that size. the husqvarna dealer told me they have an error and some place send out the same size as the drive...

ok but i'm saying they are 2 different sizes. i have 3 of the drive belts now and when i compare them the difference i like 2" when holding them in your hands and i tried using one on the impeller and it was loose as a goose. so if you ever had to do one and get that belt i'm betting your going...

the model is pr271 (96192007301) according to my owners manual t different size belt. like i said i got the 4L x 38.2 belt one time from the parts store, one time form lowes and one time from poulan website and they all are for the drive belt i tried the poulan one on the impeller and i...

i see tht but my belt is 35.2 i measured it. that number 581832401 is not correct for my machine i got 3 of that number and i tried them and they are as loose as a goose. 2 different belts 2 different numbers. the 4l x 38.2 belt is 584 83 2401 the one i need is 581 83 2401 thanks

thanks they are 2 different widths according to the poulan pro website. the drive belt is the 4L x 38.2 the impeller belt is 3/8" x 35.4 long and yes you can get kevlar belts at the auto parts store i have got lots of them over the years but they may not have the 35.2" belt but they do have...

i have the poulan pro snowblower model pr271 and the impeller belt finally gave up. the book calls it a 581 83 24-01 it turns out to be 35.4" long. so has anyone figured out the normal size of this belt so i may get on at the autoparts store or maybe lowes? the drive bel they crossed in the book...

ok i got the carb and will be installing it tomorrow. because the thing did run rather good last week but started hard i believe all that is wrong is the carb. tomorrow after i install it i think it should start up just fine. i will return here and give the final resolution on this project. the...

thanks when the parts get here it should be a easy repair. might be just in time for snow. thanks bp.

ok it does not have the kit it has the float. i found the model number finally and have a carb on order. thanks for the help and ideas. late getting back this was in the spam folder. i also did find a youtube that talked about these models and i had the same issue, now when the car gets here i...

i got this snowblower from the neighbor and he asked me to see if i can get it running. so this is what i found so far. i took the carb off and cleaned the bowl, and set the what may be the idle screw to from 3\1/2 turn all the way out to 3 turns and it will about start but not stay running...

i have a 14' boat on a trailer and i want to flip it over for the winter to keep the junk out of it. it is an aluminum boat and i do not have help to flip it, so i wonder if anyone here on the mower forums has ever built a device that can be mounted to this is the bow winch structure and let me...

never mind after posting i found some that will work. i tried universal tie rod ends search and found both the threaded and the banjo style so now to figure the ones that will work the best and go for them.

i'm looking for repair tie rod ends. for the dyt4000 sears rider. yes i know i can get the complete tir rod but i'm wondering if they actually make the ends the can either be threaded on or welded on. and yes i will need to thread the rod or weld-on nuts like the extended nuts used in hanging...

ok here is the end. i found one. i posted on a local forum and a person had an older sears rider they junked out and happened to have the chutes for it yet. and they were free, can't bet that with a stice. plus it fit good enough to do the job. but if not for the help from this site i may not...

ok update. agrafab called me and told me that rider in question is made by husqvarna, and they gave me the item number for the bagger as 24891 so now on to husqvarna to see about parts for that item. thanks for the help.

ok then the other owner must have put one on it. it sure looks like it may have come with that unit. my rider has the same bracket on it that is attached to the main frame. and the book does not show a bagger for my machine but it came from sears with a bagger on it. so i will keep looking. i...

ok update. i went out to my rider a sears made by husqvarna and the bagger doesn't have any numbers on it. so i will need to see about contacting those 3 mfg. given to me hear and see if they can help with that.

thanks is there any chance you might now where to look on the bagger unit for that number? i looked on the top cover and the top chute, but did not take the frame off, might it be on that frame assy. thanks

thanks the eparts could not help. they say to contact sears parts directly, they are not online and have not been for wees. so i will look up the husqvarna mtd or ayp and see if theyhave online email or chat. thanks for that much anyway. it gets me further than i was.

ok i went to sears parts direct and they do not show a bagger when i enter the rider model. i entered 917.273350 for the rider model and it brings up the rider parts. but i does not show any bagger parts. so i ask for a bagger in the box that lets you enter a part number or description and...

thanks. i will try them.

thanks but i have post that question about 3 weeks ago and go nothing and then a few days ago and nothing. i figure because i got no replies that the area i had it posted was not correct so i moved it to the pro section just to see if the pro's may have any idea. most forums get answers in a...

i have a craftsman rider model 917.273350 and i need the bagger chute that connects to the mower deck. i went to the parts direct and found the mower but the chute does not look like it is the correct part. or at least by the picture. they give a part number of 131970 for the deck chute. but...

so are there any lawn mower repair guys here that can hel with this issue? thanks

i have a craftsman rider model 917.273350 and i need the bagger chute that connects to the mower deck. i went to the parts direct and found the mower but the chute does not look like it is the correct part. or at least by the picture. they give a part number of 131970 for the deck chute. does...

i have a sears rider i got used about a year ago and it came with one chute for the bagger. i looked up the parts for the model number and the parts listed do not look like what came with it. the previous owners drove it to me and forgot 1 or more chute parts and i did not notice until later...

i have the poulan pro model pr271 snowblower and i had the control panel fail today. the forward reverse cable anchor on the underside of the panel broke off. after taking this apart and fabing a repair i discovered it was designed to fail. the cable mount is 2" higher than the lever the cable...

i have a snapper push mower that is maybe 20 years old. i have not used it much because i got it for a spare in case my rider failed. 3 times i had to replace the flywheel key due to it shearing for whatever reason. they are cheap as hell and the next time i may just make one but this thing...

i had the neighbor drop off her yardman push mower today and she said it either will not start when cold or is hard to start when cold. she said both but it she must get it to start as she said it starts good after it warms up. so i too off the carb it looked clean and sprayed it with cleaner...

i have the craftsman riding mower that has the 18.5 itek engine and this thing kicks back on the starter when cold and hot. more when hot. i have it on a maintainer so the battery is up to speed. metes says 13 volts before i try to crank it. it starts after the first cold kickback but when hot i...

i don't think i see it now what i need to find out is if i did have crabgrass will the weed and feed stop it or the crabgrass preventer stop it from returning this year. i posted tons of pictures last year and the consensus was that i had crabgrass. so far this year after the snow it grass is...

last year i posted about the grass i had n my yard. the group decided it was crabgrass. but being it was late in the year i did not bother just killing the yard off to fix it and it was to late to put anything on it. so now that it is about time to put fertilizer on the yard tell me will weed...

i hope this is the correct location but i have a sears leaf blower and i can't get it to run. i almost starts for a second then stops. this is what i have done. adjusted the mag to 4 thicknesses of paper, took off the carb and blew it out took off the cylinder and found the ring froze to the...

i did upload a side view but now i don't see it i will get one uploaded. i can't see any purple in the grass but i will ask the wife if she sees any. i can't see the colors well. it just looks brighter to me. and the grass is real small. thanks bp.

i have this grass taking over my yard. i grows so low that i do not need to mow it. it is a light shade of green broad leaf and looks like the pictures. feels good walking on it. my research is telling me it may be some type of carpet grass. i can see my original grass in it still but this grass...

i have a 3 year old polan pro snowblower model may be PR300ES! i'm not in fornt of it now but on the polan site this model all look the same. anyway does anyone happen to know if this series came with the powered chute if so any part number i can get so i can research it or maybe even a line to...

ok i have a question is there a grass that i can apply that will just take over an existing lawn and still look good next year? i water 2 times a week in the evening for 30 minutes per zone. thanks

i have a 17 hp briggs & stratton intek v twin engine and the starting motor bendix broke. i did not see any numbers on the starting motor but on the bracket i see these numbers on the bendix side it is 9807015m and on the back of that bracket it is 28154. are these bracket number issued to...

i got a poulan pro 270 snowblower a few weeks ago. so far it seems like a good machine. it does bog down in deep snow but so far has not stalled. although i have stopped forward movement at the few times it bogged down to the point it seemed like it was going to stall. anyway my questions are...

i read on this forum somewhere about who makes the dyt4000 mower tractor but can't remember where so maybe someone here can update me once again thanks. i'm looking for a way to bypass the seat. got to be a way tired of it stopping when i have to move some off the seat.

i have a 9-27 snow blower with power steering that has the one handle chute lever that controls the side to side and the up and down. the model is 247.88790 what i need to knw is did sears ever come out with a fix for the chute up and down? if i tighten the bolts i can't move the chute and with...

i would like to get the wiring diagram for the dyt4000 craftsman mower. what i want to do is eliminate the seat switch so it will not stop when off the seat. yep that is a safety thing but i'm tired of the thing stopping if i need totest run it or bend over to pick up waste in the yard etc. i...

i have a dyt4000 rider tractor and compared tot heyard bug i have this machine is terrible to steer. takes both hands to do it. is there any power steering addons for this machine? or is a power steering even available for the riders? it is hydrostatic so maybe they make a unit that will plug...

i have a yardman yard bug mower (yea poor me) but aside from that can anyone tell me where i can get a gator blade for it? it has the 27 1/2 cut. if they just don't make the blade then can anyone tell me the blade hole size or how i can measure the hole size on my blade? if i can get the star...