slomo's latest activity

Step 1). Load test battery and clean and tighten all connections. Step 2). Check valve clearance and adjust as needed. Step 3). Listen...

Yes, but the valves need to be properly set within tolerance to make the final decision if the compression release has failed. But...

So stay off Fleabay and Scamazon why don't you LOL. :p Start using Mouser and Digikey for example.

The ones that irritate me are the ones where you go to pull them out the plastic comes off leaving the entire metal fuse body in the holder

Didn't happen to have the deck engaged and forgot to push down the pto switch button.

If he tore it all down as we see in the pics then he is capable of reaming a valve guide and tossing on a head gasket.

Guessing at it, looks like a 33" deck. Rear skinny tires look like it should be a 28 or 30" deck. That mower, that engine, are the...

Running good thins morning. Thanks for fixing it guys.

Looks like smooth sailing now

Glad to hear she is slaying grass again. Nice find on the switch. Bravo!!!!

Hello Friends!!! Problem solved!! First of all, thanks to everyone who took the time to respond and help me figure this whole thing...

Hello Mjhover, Sounds like a plan. Make sure you have a way to transport it in the future if needed. Pickup and delivery are never...

I had an old Snapper SP back in the day with a tank susceptible to melting from engine heat. Seam would distort & split. I went through...

Dead bearings and such. Listen to them while spinning each one. Any growling needs replaced.

Tells me people removing them by jerking connectors side to side, side to side, rowing the boat till the connector comes off. That...