sgkent's latest activity

Google AI: Top Smartphone Tachometer Apps SoundTach: Best for vehicles and small engines like motorcycles, dirt bikes, lawn mowers...

if it is a plastic manifold, you may have a warp between it and the carb, allowing just enough air in that the idle mixture is affected...

Very possible - in which case the pieces got between the head and piston. That has the same effect including a damaged rod. The point...

there is a 3 month old post on facebook for someone named Josh Duke who was looking for one. Might read that thread, it lists 3 dealers...

drain oil and gas, Replace. Dry off with leaf blower. Place in sun all day. Use motorcycle cable lubricator for best cable lube. Add...

I don't know because I don't have one, but do the autochoke versions have any springs on them?

there are many spring configurations on the 6.75 hp 120000 series motors. Many are in the Briggs repair book showing those...

can't say mine moves much more (and its new since I remanufactured my 20 year old Toro with a Briggs and Stratton engine a couple weeks...

The screw is only needed if a cable attaches there. That mount is on many mowers where nothing is mounted to it. It is that way on our...

Have you verified that the engine kill wire to the coil(s) is being connected when you turn it off? If you manually ground that wire...

Does it lose power when the blades are not engaged and the RPM is up? Make sure the belt moves freely. If it is binding the amount of...

where did you get the spark plug? I have seen two youtubes in the last 48 hours where the only thing that was wrong was the prior owner...

Liquid wrench is what I use. Are you able to heat the steel some without damaging the plastic? I wish there was a picture so those of us...

clean it a little as best you can with an exacto knife. Slide some heat shrink tubing over the piece of wire you will be adding. Cut the...

If the nut is loose so the arm can spin on the shaft, and you cannot spin the shaft in either direction, then something is jammed. Keep...