Rivets's latest activity

I think that’s what I posted??

Tape measure would have told us deck size!!!

I’m guessing Husqvarna, sure looks like this one. https://www.ebay.com/itm/127360612885 It would have been a lot easier if the OP would...

This manual may help you out. http://www.tuks.nl/WFCProject/img/Engine_Carburator/81644210-Briggs-Stratton-Service-Manual-L-Head.pdf

Are you talking about the cogged timing pulley? This pulley should be tight to the shaft and there is no bearing, which I think you are...

No, the convex goes toward the pulley, so pres is applied to the pulley not the nut.

If it has not run for awhile, I would be checking the crankcase seals. They may no longer be sealing the crankcase, allowing air to...

Never seen or heard of it. But I’ve never watch King of Queens.

For those who don’t know, there are 2 types of 4 sided screwdrivers. One is called a Reed and there other is called a Phillips...

Three things that have bailed me out when I run into this problem with Phillips screws. 1. Make sure you have the right size driver...

As a retired teacher do you think i retype this every time I need to use it. There are better ways to use my time.

Before throwing parts at your unit, a good tech is going to follow his troubleshooting procedure to pinpoint the problem. Here is the...

In your first picture, between the gas cap and the carb, straight in you will see a bolt head. Might have to clean all the oil and dirt...

This manual might also help you out, especially when you’re reassembling the carb to the tank...

First the model number you posted is not the same as the model number on the tag in picture #4. What gives? Second, as IL states you...