Rivets's latest activity

That model mower was manufactured for 4 years and depending on which year you have it may be a Briggs or Kohler engine. Please provide...

Sorry I’m too stupid to realize you want to permanently attach a hose, with a 90 degree bend to a Tillotson carb. I have never seen a...

You have been around this forum long enough to know that we need more information than you have supplied. Model and spec number of the...

In today’s market you get what you pay for. Recommending anything less that $3500 is a crap shoot, as unless you have a flat and smooth...

Can’t open photos unless you have google photos, which I don’t. Can you post them a different way?

Knowing how to properly use a good analog meter is better than using a cheap digital meter. Cheap analog meters aren’t worth their...

Spindle assembly MTD part #917-0913, is available, just need to do a google search. Might try this site for the two pulleys...

First thing to check are battery cable connections, both on the battery and solenoid, plus negative chassis ground. Make sure each one...

Seeing that you don’t supply us with a model number, I suspect you have a model D engine. I agree,probably a fuel issue. Here is a...

Found this on the internet which is always 100% accurate. Key Milestones in Electric Lawn Mower Development 1920s-1930s: The first...

It may be in the manual, but why take a chance on voiding the warranty? We have a dealer in this area which will do anything to pass...

If it is new, DON’T TOUCH IT. This should have been adjusted properly by the dealer. You messing with it can void your warranty. Back...

Looks like this poster just deleted his original post and other reply, so there is no reason for this thread to be open. Must have had...

Or it could be that the float needle is stuck open and the crankcase is now filled with gas. Pull the dipstick and check to see if it...

I suspect that the linkages are not hooked up correctly. This manual should help you double check your assemblies...