Rivets's latest activity

As a retired instructor I’ve answered more questions than you’ve ever asked. My problem is with those who are so fixated on what they...

Ok, don’t waste your time calling Briggs, probably a bad idea anyway. You came here asking for help and the symptoms you described...

I would remove the carb and check that the float level is correct. Many times the needle will swell, causing a lean mixture. You will...

I would contact Briggs customer service and explain the problem. Only costs you a little time no matter what they say. Being a service...

First, if it is only two weeks out of warranty I would be going a GOOD authorized Briggs repair dealer and see if Briggs will authorize...

Original Headlight assembly is Toro part number 116591. Might be able to find one if you have a small engine grave yard in your area.

That looks very similar to this one. Sorry I misunderstood your definition of OLD. I’ve forgotten more than I remember, so get...

Not a bad design, just needs a bit more patience and understanding on how carbs work. They get a bad rap because people don’t have the...

Started working on engines in the early 60’s. Briggs kick start, Maytag, hit-n-miss etc this site has come in handy more that once...

This is the one I have used for years when I come across an older BRIGGS. Sorry its not blue...

Solid old engine, which I call a mule, just give it a little TLC and she’ll serve you well. I suggest you remove the carb and give it a...

You said you replaced the key switch, are you sure you used the proper switch? Many switches look alike, but you must check the...

Logged in and out many times yesterday and this morning, no problems yet. Thank you for your help and due diligence in hopefully...

Hello Ibrahim, Not out of the woods yet. As has day wears on, the site is hanging up trying to open posts or send replies. 10:15 TX...

Most times it will not load anything. Other times I will type in a reply, but it will not allow me to post it. I must quit the site...