Rivets's latest activity

  • R
    Rivets replied to the thread Website slow.
    I think I’ve tried that in the past, to no avail. You must remember that many of us can fix most small engines, but are computer...
  • R
    Rivets replied to the thread Website slow.
    I don’t see any changes this morning. Took me 30 minutes of trying before it let me log in and forum is very slow. I appreciate all...
  • R
    Rivets reacted to Ibrahim's post in the thread Website slow with Like Like.
    Well the server is being monitored more now. I did find a misconfigured script that hopefully was the culprit with our constant...
  • R
    Rivets replied to the thread starter safety relay.
    Some Raptors do not use a starter relay and some do. Attached is a wiring diagram for Raptors. Might just have to trace the wires to...
  • R
    Rivets replied to the thread TB Sickle mower 3.5.
    The model and spec numbers are probably stamped on the shroud, just above the spark plug or on the side. With those numbers we will be...
  • R
    Rivets replied to the thread starter safety relay.
    Please provide us with the model and serial numbers so we can see if it even has one.
  • R
    Did you install the pump diaphragm and gasket in the proper order? Plus tighten the screws in the proper sequence? Section 3, page 9...
  • R
    Rivets replied to the thread Starter issue.
    Banging on a starter is not a good idea, you can do more harm than good. Might have to replace the starter. If you have a tech in your...
  • R
    Rivets replied to the thread Older groundmaster 120 electrical.
    The individual tabs on the back of the switch are labeled..
  • R
    Rivets replied to the thread Older groundmaster 120 electrical.
    First thing that comes to mind, are you sure that your new key switch is identical to the old one? They may look the same, but you must...
  • R
    I guess I read this thread wrong, as I was assuming the OP was looking for trimmer brands, not line brands. Sorry about that. I use...
  • R
    Rivets replied to the thread Stihl MS 250 Chain Saw Problems.
    Try this procedure which I use on my Echo. Put the choke on fully closed. Put the rope 2 or 3 times, until you hear it pop. Move...
  • R
    Rivets replied to the thread Stihl MS 250 Chain Saw Problems.
    Before bad mouthing anything, take it back and have the mechanic take a look at it. At a good repair shop and in a reasonable time...
  • R
    Rivets replied to the thread 422707-121401 sump gasket.
    Before doing anything more remove the key and bolt. Then take some medium/fine abrasive paper and polish the crankshaft until it is...
  • R
    This is the trimmer I recommend to anyone that asks. I bought this 8 years ago and have had absolutely no problems, and I’ve abused it...
Top