Recent content by RevB

This is what happens when you get older.

Here's another guy whose eyes just glazed over.....DC? Voltage? Regurgitator?

He should immediately go to the nearest Learing Center...

Bought a gas powered 4 stroke edger for $5.....guy said it wouldn't cut any more. The blade was 3 inches shorter than the normal blade on each side, wouldn't start because the primer bulb was cracked and you couldn't prime it. All of $4.50 to fix. Starts second pull every time with ten shots of...

Nothing wrong with that. Still $200 either way. Didn't come with a warranty either......

If you ever do decide to R&R the starter.....the brush springs are fiddly and you want to be under a sheet on a solid floor. They will fly several yards. The sheet resticts where they go. Ask me how I know 😁. Had one that bounced off the 10 foot ceiling *tunk* and landed somewhere with a...

Did you just hook it up to see if the bendix operates and motor turns or did you actually disassemble, clean commutator (after 20 years it probably needs attention), and lube the bearings (most likely oillite) and check windings. Not directly related to your parasitic issue tho....

https://www.mytractorforum.com/threads/craftsman-hydro-pulley-replacement.1413214/?utm_source=google&utm_medium=organic You already had an answer....

BB parts are becoming worse than crap. Anything to save a few cents. SKF, Schaeffler, Timken, NSK, NTN, JTEKT, MinebeaMitsumi, NACHI-FUJIKOSHI, ZWZ, and LYC. Any of these manufacturers will have quality products. As for the Chinee stuff...they often come with very sparse lubrication If they are...

About that lack of filter. "The 422707 series uses full-pressure lubrication. Oil-filter adapters (and remote/cooler options) appear in parts diagrams for type 1263-01 as available components, not as standard equipment on every unit. Some engines left the factory without the filter/adapter...

Have you verified no trash in the tank blocking fuel supply or tank vent not venting....