RevB's latest activity

The old "ethanol" trope.

Parts cannon.

Any good belt supplier/stockist has a belt measuring "stick". Ask them if they have one before you go. Take off the old belt and they...

A "single lock washer".......the Belleville or are you talking about a split lock washer?

That and the fact that without the adapter the bolt was probably bottomed in the crank hole and the clutch wasn't contacting the shaft...

Kinda don't think you need 120psi since the gauges only go to 100 psi. 50 psi will do as you are measuring the relative sealing ability...

Right! I am trying to save this machine as I agree, modern replacements are junk- just like the new cars today vs older ones. UPDATE...

Yeah....I had a KTM 250 XCW that went to 220 but the head was shaved 40 thousandths and the cylinder trued 5 thousandths and that...

Effective compression ratios of piston port two strokes are typically much lower than an equivalent four stroke of the same bore/stroke...

Years ago I attended a service school and if I don't forget what I was told --- They stated the schrader valve needs to be as close to...

Precisely. There is a thing as too much lubrication. Are the balls supposed to skid or roll. I'll take roll every time. Too much creates...

You know every shade tree mechanic “knows” bearing companies skimp on grease. Or maybe NTN, Timken, SKF, NSK, etc know more about their...

No. Float No. Float/Needle just regulates flow depending on the fuel pressure. If pressure is too high it overpowers the Float/Needle...

Differential tester....

1-877-473-6767, dial #2 to reach NGK support. You send them images of a suspect fake plug and they confirm whether it is or not...