Recent content by nodlenor

I have a 2019 Country Clipper with a 48” deck. It does a terrible job at mowing. It scalps and mows uneven. I’ve tried adjusting it but nothing works. Does anyone have any suggestions as to what can be done to solve this problem.

4getgto, I’ve been looking at the first one and wondered if it would do the job? I might try that one. My yard is so rough it just tears my back up. I need something to soften the ride. Thanks!

No. I’m wanting an air ride seat.

I have a GT235 John Deere and a bad back. I would like to put a suspension seat on it in hopes it will help. Does anyone have any recommendations on what brand and where to purchase one?

I thought about heat as a cause but I thought surely that would have been done when it was worked on earlier.

Took it to a mower shop.

Engine number FH580VA11745. Code FH580V-AS04. It has approximately 850 hours on it if that helps.

Intake valve. The first time the head was pulled and had to be replaced because the valve pulled the guide out. The second time the head was pulled and the valve shut with very little effort. The third & fourth times the engine backfired and the valve shut on it’s own. I don’t know if it’s the...

What is with the valves sticking on my Kawasaki. I have a GT 235 John Deere and have had a valve stick four times now, three times this summer. I use Kawasaki oil and put sea foam in my fuel but nothing seems to help. Anyone got any suggestions?

Was looking online at some oil filters for Kohler engines. I found two that fit mine and the only difference besides height is microns. Not sure what micron means. Can someone set me straight on this? Will either filter work ok?

Anyone have any info on Country Clipper zero turn mowers? I’ve been doing some reading about them and I like a lot of what I’m reading. Plus there is a dealer not far from me.

I broke an axle on my LT2554 Husqvarna (right rear). Just wondering if that is a weak spot on this model? Anyway my brother in law replaced the rear unit on his LT2654 and wondered if an axle out of his old unit would fit mine. They look to be the same but not sure.

I'm 74 and have back trouble. The mower I have rides pretty rough plus my yard is rough. I would like to have a mower that rides smoother. Maybe with suspension or a good seat an done that isn't too hard on the bank account. Any suggestions would be appreciated.

My JD with a 18 hp Kawasaki had a valve stick and popped the guide out, at least that is what the repair person told me. Is this a common problem with this engine? This is the first Kawasaki engine I have owned and I don't know much about their habits. It has a little over 800 hours on it and I...

My Husqvarna 2554 has very poor traction. I bought a pair of wheel weights at a flea mkt. but they don,t fit. I guess I could make them work somehow but I thought I would get some ideas from you guys as to what the best way to solve my traction problem. Any inexpensive ideas for a solution will...