Recent content by navydad2022

I think that's what's wrong with my mower on miss firing is the cheap coil.

So cheaper is not a way to go,l found that out on buying a cheaper carb .and found out and purchased OEM part.

Would a new coil act up as far as intermittent to where it sounds like uneven engine firing.

It did settle down

Thank you 🙏

Thank you very much

I have two sizes on hand l know one 1/4 inch ID and one is a tad bigger.l think somewhere between the tank and carb is a restriction and maybe as previous mentioned by an experience mechanic.

Thank you will try it

Thank you,it didn't have one when l got it , quick question the larger the diameter of gas line matters

Is it necessary to put a fuel filter,l have fuel shut off.l put one just for heck of it.l heard that sometimes you get an air lock and is this true

It's got me puzzled because l take carb out inspect and retighen everything back and it works for awhile

Would a bad gasket between carb and engine cause bad suction to starve fuel

Thanks,will try to adjust the governor and how would l adjust springs if possible.l noticed that the carburetor adjustment screw does little to adjust fuel.

I cleaned my Snapper (281223BVE) carburetor and it idles ok but when l engage the blade the engine revives up and down.it seems it is starving for More fuel.Can the fuel filter or diameter of the fuel line matter.also could it be air lock and how to prevent it.21A907 0124 E1

I cleaned my Snapper (281223BVE) carburetor and it idles ok but when l engage the blade the engine revives up and down.it seems it is starving for More fuel.Can the fuel filter or diameter of the fuel line matter.also could it be air lock and how to prevent it.12 hp 21A907 0124 E1