Mr. Mower's latest activity

Anybody tell me how to “unplug” the lock lever switch on my hustler raptor 54? Cant get it to release, wut im missin?

Costly mistake...should have left the handle out and dragged it. Better yet, pull the two releases on the hydro's and go very slowly...

Also make the drive belt idler arm is freely moving as to take tension as it needs to. A slipping belt can mimick a bad hydro. But I...

raise the wheel off the ground The run the engine at the lowest speed it will run smoothly Work the control arm 20 to 50 times slowly in...

Seeing that the right fender contains most of the electrical connections, I would start my search by removing the panel and looking for...

So Just changed fuel filter and tried with gas cap off and on. No real change, ran fine for about 10 min then faltered a few times then...

im beginning to think it has to be electrical….. i hate spark chasin. But im onnit

Sorry, its a hustler raptor flipup 54, 933853 mod num, 16057849 ser num. Shunted seat switch, key module and solenoid replaced. Ill try...

I have this same issue, and it has been a recurring one. The positive terminal washer corroded and disintegrated, and the positive...

To get the corrosion off easily, put a little baking soda on it & then add a little water, it will become active, after wash it off...

Dielectric grease

My five year old raptor flipup 54, mows along fine for five or more (varies) minutes then QUITS, park the handles, disengage pto and it...

This is unusual so I thought I would post. I put in a new battery to my Hustler Raptor. When I turned the key nothing happened. The...

Specific's ! Folks....always, always be SPECIFIC and as detailed as possible to your situation and always "double check" when typing in...

Well it does help when the OP actually post detailed info which he just added more details then just mower died. The more info we have...