Recent content by melsauto

I can't figure this out installed new float with needle valve. I tested it by blowing air through it air passes through. After installation it seems like fuel not going into cylinders. Spark plugs are dry.

Are you asking about the float needle valve yes.

Attachment parts diagram exploded view.

Float assembly

I took the carburetor apart again today. I was trying to blow air in through the inlet keeping the float bowl facing down. The air was going through the passage into the float chamber. When I removed the float and needle valve air passes through. I ordered 16031-7001 Float $24.2 16030-7002...

Yes it attempts to but backfires

If it has an ignition module it would cause a no spark when hot,Check for spark when hot after engine dies. Bad coils could would do that.

On some carburetor you can't adjust float level.

I have replaced ignition modules with the same type of issues on cars and pick ups.

Toro z master 74179 Serial 230005065 Kawasaki FH601V-AS23 4 Stroke Engine FH601V. Nikki carburetor 26D 150037075 266-541 Replaced coils ,spark plugs, removed carburetor cleaned jets, checked choke functions, checked anti back fire valve. There is fuel going upto the carburetor but not into the...

Nikki carburetor 26D 150037075 266-541 What do these numbers stand for. These are numbers from 2003 Toro zmaster with 19 hp kawasaki engine.

I bought a used 2013 Dixon speedztr 42 inch i bought it from a 70 year old lady, when i went to pick it up i noticed she had a brand new John Deer mower. Ok now my problem is the mower keeps breaking the deck belt in one hour of use, i opened up the idler and tensioner and now the belt is very...

Hello , I just bought a used 2003 Toro Z-Master 74179 with serial # Sl 230005085, Z 149 the hydraulic system seems to groan and very slow response in steering and forward and reverse are like the pump is straining. I would like to know Wheel Motor or Hydro pump - which one is bad.Where could i...