Hey guys. I have a problem that I haven't encountered yet. I just replaced the head on a 17.5 Intek due to valve guide intermittently moving in the head. Ordered a new head (OEM from Briggs) and it looks like Briggs made a change to the head and added more cooling fins to the exhaust side of the...
Hey Guys
Here's my problem. I have a Toro Time cutter zero turn mower that's got me stumped. The guy that brought it to me described the problem as the engine cutting out and stumbling under load. He stated that he replaced the carb and stated that the problem improved but he could not get the...
Hello guys. I have a strange (to me) problem that has me stumped. I bought a John Deere Z 245 zero turn mower off a guy that would turn over but won't start. He had replaced the carb with a new one, new fuel pump with new fuel lines and cleaned the fuel tank. It will start and run on starting...
Hey Guys
Im working on the above trimmer. The gas of course sat up in it and it wouldn't start. Pulled the carb and tore it down and gaskets and diaphrams were trash and carb was dirty. Looked at a G&D kit and it was a little less than a new carb so no brainer. I replaced the carb and the thing...
Ok Guys
Every season I have one or two mowers that stump me. This is one of them. Im working on a Craftsman LT 2000 Rider 2008 model. It has the following Briggs Info:
Model
331877
Type
0869-G5
This mower is running me crazy. It will cut for about 15-20 minutes and then it will start cutting...
Hey Guys
I have a problem with a mower I am working on. It is Briggs 6.5 HP self propelled with the following Briggs info:
Model: 126T02
Type: 0299-B1
Code: 11050558
The problem im having is when I got the mower the original owner had attempted to clean the carb after it had sat up for the...
Hey Guys
I am wanting to repower my old 3.5 HP Tecumseh engine and was thinking about replacing it with one of the Predator 3 HP engines that Harbor Freight sales. Has anyone on here used these engines and can anyone tell me if it will bolt right up?. The mounting plate spacing appears to be 6.5...
Hey Guys
I picked up a Troy Built Lawn Tractor with a B&S 18.5 HP engine.
Model Type Code
31P777 293-E1 04 702ZA
The mower has not been taken care of very well. The guy I got it from stated that he had gotten the mower back from the repair shop at the beginning of spring and...