Recent content by jmrollans

ok, i appreciate all the advice and knowledge that has been given by all. Decided to back up 10 and punt, putting in mechanic shop tomorrow!

I ohm'ed all the ground from the battery to the engine block and it was good. is there another ground somewhere? I still have the same issue when i turn the key switch all i get is a clicking sound by the relay and the voltage from the battery drops. is there another ground on this mower...

QST24BE522, 731614

update on my issue, I tested the ground and it ohm good. tried the jumper cable idea and it didnt work. when i turn the key to start the relay by fuseblock clicks. is that realy part of the starting system?

ok will try that and see, thank you

i have checked the connections they appear to be all tight. i did not see a ground cable that attached to the frame, just a ground cable from the battery to the engine block???

ok will do that tonight and report back.

yes the solenoid is connected as per the diagram. when i try to start there is voltage at the starter when the key is turned.

here is the model and serial number of my mower QST24BE522, 731614

sorry didnt know i was double posting, ill get the serial # tag and repost this.

I have an Exmark Quest that is having starting issues. When I turn the key to start all i hear is a clicking sound, thought the starter was bad, changed it and have the same issue, replaced the starter solenoid, nope same issue. Checked the voltage on the battery, dropped from 12.9 to 7.8 when i...

I have an Exmark Quest that is having starting issues. When I turn the key to start all i hear is a clicking sound, thought the starter was bad, changed it and have the same issue, replaced the starter solenoid, nope same issue. Checked the voltage on the battery, dropped from 12.9 to 7.8...