ILENGINE's latest activity

With the MTD variable speed pulley system both belts have to be replaced as a set otherwise things don't sync properly and will lead to...

The SAM and the modules should have a part number on them. That may assist is looking up parts and/or bulletins relative to your engine.

I always said we need to split our elected officials into 2 groups. The group we hang and the group we drown. I would say we should...

If you are loosing spark after running the engine, I would be replacing the coil since it sounds like it is experiencing heat sink...

Might try reading post #13.

Correct, Those engines don't come with exhaust. But for the 35 HP vanguard horizontal shaft you are basically limited to 3 mufflers...

The serial number of your scag would assist us in looking up the correct version. But from what I am finding it appears Scag is...

Have had plugs were you could twirl the ceramic in the metal shell. Also the ceramic is porous and since most plugs are slated more...

Nothing will make you pull more hair out then a champion plug. The only plug that used to list a 25% misfire within acceptable range of...

Most likely it is 1/4 inch ID

All appearance come to he has the correct belt. The issue with this style of mower is it uses the deck lift mechanism to also...

Generac engine

According to JD that mower uses the 40N877-0001-B1 which uses the 592829 stator and 794360 regulator with the 5/9 amp regulated system...

Not unusual for hydraulic oil to be 100 degrees above ambient air temperature. And with a hydrostat system they are not continuous flow...

Some starters are available depending on the actual 41 model number. Some of those trimmers with multiple brand names were subject to...