ILENGINE's latest activity

Haven't seen it on that engine but have seen issues with the bottom bearing on the Briggs twin OHV inteks wearing funny allowing oil to...

Keep in mind that 15w50 used inside of an air cooled engines normally sees temps of 275-300.

OIl pump driver. some motors use a supplemental oil pump which is driven by the cam. if you don't have an oil filter or provision...

And that is the downside of electrical issues. You can spend hours and hours tracking down and repairing what in some cases us a minor...

wiring replacement after a fire or overcurrent melt is about the worst job out there. I excel at finding and fixing electrical and...

2.5-5 amp is roughly the norm.

Thanks Ilengine. So Packard, measure the resistance of the clutch. At 1 ohm, it'll draw over 12 amps, 2 ohms 6 amps, roughly. It...

Lawnmower blades are kind of a metal art. Too hard and they are subject to harmony cracking leading to parts of blades that go flying...

Most are in the range of 2.3-3.3 ohms.

Sounds like your charging system is not working. With engine running, at full speed, and no blade engagement, measure voltage across...

Overfilled or mower being tipped in a direction that is allowing oil to enter the breather where it can flow into the air cleaner. Or...

I was editing my post when you responded so may want to go back and look at what I added.

The bottom bearing in your electric clutch has seized and is now turning the deck drive pulley on the clutch instead of freewheeling...

And then after you get the spark issue fixed, then you need to concentrate on setting the timing.

The problem is your standard dimensions do not apply to John Deere or MTD/Troybilt/Cub Cadet belts because of unique width., depth, and...