ILENGINE's latest activity

Today’s coils cannot be tested without an expensive piece of equipment. If you are getting no spart through your inline tester, remove...

Seems like the deck belt is shaking really bad. Check the V pulleys for something stuck in the groove, or check the deck belt for an...

Could be that gasket but don't overlook the float valve 698537 and be careful and don't drop the jet out of the white plastic...

Artificial intelligence gives answers based on what a person has fed the program with information. Artificial intelligence is already...

It will be find to run the deck without blades, But I would start by making sure the motor mount bolts are tight. only takes 1/8 turn...

A 46" mowing deck will have an overall width closer to 50" even with the discharge chute tucked out of the way.

Soft ratcheting feel to me would mean flat spotted bearings. And it would be easier and cheaper in the long run to replace it while you...

I just bought a new XT1-LT46 myself and haven't yet reached the 5 hour mark for oil and filter change. I didn't notice the Kawasaki...

954-05022A. just correcting the mistyped number in your post

The video shows the top of the tranny through the frame. I want to see the area on the side of the transmission from under the mower...

Item #1 in this picture is the service plug using the pump and fitting in this kit to refill the units

The problem isn't the carb the problem is the absolutely junk fuel. Since Briggs came out with this engine in 2015 the biggest issue...

The date code 11042862 uses the 796608 since you are before 11070100

Make sure the bowl vent isn't clogged. If the atmosperic vent for the bowl is clogged will cause siphoning.

According to Briggs dealer distribution the 796608 is still the valid number without being superceded. And the 591137 is also a valid...