Recent content by Fairlane

Ok thanks for all the info, I have read to use the edge of a piece of glass to check the heads

Thanks Rivets, I will the gaskets ordered doing the right side first and will go from there,really appreciate all the help, soon as I can to it I will let you know how it went .

Thanks for the manual Rivets, I have been searching for torque specs for this engine with no much luck

Rivets it is a 2P77F, standing behind the mower the right side plug had lots of oil, checked the oil before i started it it was right on no gas smell, the left plug looked pretty good

valve clearance set at .005 int .007 exh

I would be ok if it is head gaskets, thats not to bad

I found another tag on the frame Model # 74775 Serial # 400842369 sorry

also it is a Timecutter MX 5000

Thanks for your repyl Rivets Under the seat the tag is as follows MFG Part # 185771VN478 Cust Part # 136-5575 Serial no. N1283530 Engine shroud Model # 127-9040 Serial # 127904016120032515 Thanks

Hi all, I had given to me a 2017 Toro ztr with ( I think is a Loncin engine ) 708cc 24.5 hp engine, Model # 127-9040. The guy told me it was a real smoker. it been setting in my garage about a year and half till I finally got time to check it out. When I tried to start it would turn over till...

I would like to buy a B&S repair manual ,, Or maybe an all around small engine repair manual,,anyone know witch ones are best.. Thanks

I have just got a Huskee tiller ( 5 hp Briggs ) that was very hard to start, put in new gas ,change the oil, finally got it to run (runs good ) but i could not control the throttle , put on a new governor spring, the one on it was not in good shape..now the throttle will not stay where you set...