Recent content by donslawns

  1. D

    Baffled by non charging Briggs

    Standard mulitmeter with battery wire connected or disconnected same result. Even with no battery it should show a charge of about 14v dc.
  2. D

    Baffled by non charging Briggs

    As in "nothing" I meant it has battery voltage but not charging or any output from the regultor. 28v A/C at wot from the stator. Indicates regulator, right? Now you now where I'm lost! To me, the stator is doing what it is supposed to do, the regulator is not. But 2 new regulators, and a known...
  3. D

    Baffled by non charging Briggs

    I got this Troybilt in the shop that was not charging. Briggs 44H777-0116-E1. Stator output was 28vac, nothing out of the voltage regulator. I replaced the regulator. Still no output. Replaced it with another new regulator. Still no output. I start questioning my abilities. I pulled a known good...
  4. D

    CV740 27hp bogs severely under average load

    90% of the time when someone brings a mower in and they say that they have low power, they are running on one cylinder and don't know it because the exhaust doesn't sound that much different to the average person. Pull one spark plug wire off at a time. The engine should run on one cylinder and...
  5. D

    Just a blown head gasket or worse ?

    That squeaking noise is the aluminum connecting rod seizing to the cast iron crankshaft. These small engines have no bearing inserts. It will most likely weld itself to the crank soon and the connecting rod will snap. Or it could have possibly broken one rod already, which would account for no...
  6. D

    How many hours do machines really last?

    My guesstimation from what I have seen is that with GOOD maintenance Briggs can go 1000 hrs, Kohlers maybe 2500 and I have seen some Kawasaki powered equipment with nearly 4000 hrs.
  7. D

    Help locating parts for Pulsar mower

    I have had a couple come through my shop and they are disposable for sure. The other Menards product that I see a lot of is their FVP batteries. People think that they are getting a good deal but I replace half a dozen per year that were bought just a few months before. Menards = Chinese garbage.
  8. D

    24hp Kohler Hard to Start When Cold

    It seems that I find a fair amount of Kohler twins that the choke is not fully closing. If you have separate controls then it is just a choke cable adjustment. I have cured several with just that.
Back
Top