Recent content by csmdew

Just found out on my mower, which had same problem, that the nut holding brake rocker on was loose and not making contact with safety plunger, tighten nut up and all is good.

Back to same problem, after mulching leaves yesterday the mower now will not start. Turn key and nothing happens. Checked and all switches are connected but nothing happens. Anyway to bypass all switches to see if it will start. Even jumping solenoid it cranks but will not start which seems to...

Found 1 switch not plugged in to the L lateral connector and had been barely hanging on for months it appears, since was packed with dirt. Cleaned and reconnected and now mower will click 1-50 times and then start. Maybe 1 time or 50+ times but eventually it starts. Done this for better part of...

I have a M5424s ztr and several yrs ago it started to click sometimes before it would actually start. After maybe a few clicks to many clicks it would then start like nothing wrong. Sometimes it acted like flywheel had missing teeth. Then is would work perfectly for a few starts and after I ran...

I have the same 5424S with 730 engine and several yrs ago it started to click sometimes before it would actually start. After maybe a few clicks to many clicks it would then start like starter not engaging fully. Then is would work perfectly for a few starts and after I ran some marine gas thru...