Auto Doc's's latest activity

If the carb is a Nikki or Mukuni carb they are NOT Phillips head screws they are JIS screws. Indicated by a little dot next to the X shape.

Im usually able to grip the heads with Irwin vice grips and get them out that way

Hello P., Hopefully the carburetor has been removed, if not you are fighting a losing battle. A few good strikes with a hammer and a...

Hi CG., I think an oil change at 300 hours in a rider is for lazy people that have more money than they have sense. I see "extended...

Hello G., It is not very common, but I have seen this happen especially where high humidity is a factor. Also, on rare occasion I have...

Hello C., Are you using the proper fuel/oil mix? I don't recommend store bought Tru-Fuel, that stuff has created more headaches than...

Can you unplug the PTO wires, and the blades still stay engaged? If so, it likely has a seized-up/ failed PTO bearing.

Thanks for looking into this Ibrahim.

Do you have the correct plug the engine calls for... not one that just fits. Parts stores are bad about giving out wrong plugs. A tired...

It happened 2 times just before I posted the problem at 8:55 CST here in South Texas. Thanks.

He likely had water and/ or trash in the "new" fuel in the antique gas can that has been sitting in the shed open most of its life. It...

Have you looked into Predator engines? They are a Chinese clone of the Honda engines in most cases.

I still have some older 2-stroke Ryobi stuff, and they have held up well over many seasons (longer than intended), but most parts have...

Hello M,. Here is a parts manual of a similar model. https://files.ztr.dk/reservedele/934679CERaptor42.pdf Has the tow link been...

This system gremlin keeps coming back and disrupting the posts. Click to post a reply and it shows twice. That and it is creating page...