Auto Doc's's latest activity

Hi firhill, You need a 12V test light to check for power to the fuel after-fire solenoid wire, not all of the bowl solenoids click very...

Hello MParr, All fuel is inherently "dirty", and the fuel filter needs to be replaced to minimize this fine sediment "sludge" from...

Parts tree is a pretty good source, but make sure you have the correct model or spec number. I will say at least many of the old ones...

Haul it to the dealer and let it be their headache.

Are you getting your non-Ethanol fuel from a dedicated pump with its own service hose? (My local stations have dedicated pumps for only...

Maybe this will help: https://www.partstree.com/models/143-026202-craftsman-engine-made-by-tecumseh/engine-parts-list-lev-pg1-0/

Someone with a good MIG welder, a grinder and a little fabricating knowledge could rebuild the spindle mounting areas with replacement...

You don't remove the dipstick and cap while running. These are not like a car engine. Inside the crankcase there is oil and air...

Hello Miles1, Are you using E-10 fuel or non-Ethanol? E-10 does not burn as efficiently. Is the blade sharp? A dull blade makes the...

Hello Hayward51, If this engine were on a generator, the exact high idle setting would be critical to maintain the needed 3600 RPM to...

Hello Star Tech, The variety of equipment has become so vast that I stock very few parts on hand. The old days of common stock parts...

Hello MParr, I will add to that by saying remove the top flywheel cover at least once a season to get any trapped debris out or mouse...

No shortcuts here. Pull the engine and get the loose parts out. Hopefully there is no internal damage. If you are not a mechanic, this...

What machine is this engine on?

Price a new rider and you will be inclined to replace the engine on what you have. Just my humble opinion. I have purchased a number...