Media

07 Apply high heat to SOFTEN the body Heat the tank plastic first because it is bigger. then apply to the patch piece. when they are both feeling

07 Apply high heat to SOFTEN the body Heat the tank plastic first because it is bigger. then apply to the patch piece. when they are both feeling

  • 0
  • 0
06 Line the patch up so it overlaps as much as possible It is a good idea to make the patch material oversize by about 1/2 inch or so.. It needs to

06 Line the patch up so it overlaps as much as possible It is a good idea to make the patch material oversize by about 1/2 inch or so.. It needs to

  • 0
  • 0
05 Bottle Shape Comparison and clean tank with the alcohol very well You have to get anything that might get between the plastics out of the way by

05 Bottle Shape Comparison and clean tank with the alcohol very well You have to get anything that might get between the plastics out of the way by

  • 0
  • 0
04 Cut the Bottle close to shape needed Preparation and making the piece fit the hole is the key to a successful operation.

04 Cut the Bottle close to shape needed Preparation and making the piece fit the hole is the key to a successful operation.

  • 0
  • 0
03 Doner Plastic Bottle Plastic bottles like this for alcohol are the same material and chemical tolerence. A Milk jug will work as well too, but

03 Doner Plastic Bottle Plastic bottles like this for alcohol are the same material and chemical tolerence. A Milk jug will work as well too, but

  • 0
  • 0
02 Gas Tank Hole to be Fixed This was my hole to resolve on my John Deere 115.

02 Gas Tank Hole to be Fixed This was my hole to resolve on my John Deere 115.

  • 0
  • 0
01 Tools Needed These are the only tools you need to fix your plastic gas tank.. other than the plastic materials to do the job that is..

01 Tools Needed These are the only tools you need to fix your plastic gas tank.. other than the plastic materials to do the job that is..

  • 0
  • 0
Body Paint 5 This is hte body pan actually installed on the frame with some of the accessories in place, but not attached yet.

Body Paint 5 This is hte body pan actually installed on the frame with some of the accessories in place, but not attached yet.

  • 0
  • 0
Body Paint 4 Right side of the body pan finishing drying for second coat.

Body Paint 4 Right side of the body pan finishing drying for second coat.

  • 0
  • 0
Body Paint 3 The paint is curing well as you can tell in this picture. This is the second finish coat and is on the top and bottom. I noticed the OE

Body Paint 3 The paint is curing well as you can tell in this picture. This is the second finish coat and is on the top and bottom. I noticed the OE

  • 0
  • 0
Body Paint 2 This is the left side of the body pan.

Body Paint 2 This is the left side of the body pan.

  • 0
  • 0
Body Paint 1 A coat of John Deere Green was sprayed on the primed body pan on the top and bottom. This is a rear view to see the foot pads.

Body Paint 1 A coat of John Deere Green was sprayed on the primed body pan on the top and bottom. This is a rear view to see the foot pads.

  • 0
  • 0
Body Priming 3 Back view of the body pan once primer has been applied for the second coat

Body Priming 3 Back view of the body pan once primer has been applied for the second coat

  • 0
  • 0
Body Priming 2 Body pan was sprayed down top and bottom. It seems the OEM primer failed somehow to cause so much rusting to occur. Note old paint wa

Body Priming 2 Body pan was sprayed down top and bottom. It seems the OEM primer failed somehow to cause so much rusting to occur. Note old paint wa

  • 0
  • 0
Body Priming 1 Body pan was stripped down to metal and primed

Body Priming 1 Body pan was stripped down to metal and primed

  • 0
  • 0
Front Plastic panels are not flaking but are sun worn. I will remove the light lenses and refurb using chemical processes.

Front Plastic panels are not flaking but are sun worn. I will remove the light lenses and refurb using chemical processes.

  • 0
  • 0
Rear View Paint is chipping off literally in sheets. The factory paint was baked on and it appears the primer has failed as a root cause.

Rear View Paint is chipping off literally in sheets. The factory paint was baked on and it appears the primer has failed as a root cause.

  • 0
  • 0
Left Side Left is same as the right side loss of paint as it chips off the body and most is missing on the mower deck.

Left Side Left is same as the right side loss of paint as it chips off the body and most is missing on the mower deck.

  • 0
  • 0
Right Side Lots of paint chipping off. Same is true of the mower deck. Body and frame seem to be intact, so just a paint job and cleaning might just

Right Side Lots of paint chipping off. Same is true of the mower deck. Body and frame seem to be intact, so just a paint job and cleaning might just

  • 0
  • 0
Console View Console is heavily sun-worn and will require being redone to bring it back to life.

Console View Console is heavily sun-worn and will require being redone to bring it back to life.

  • 0
  • 0

Footer Links 1

Top