transmission bypass rod

[Darrell3958]

the transmission bypass rod does not seem to be working at all. pull it out it rolls, push it in it rolls. I need help with this one

 

[ILENGINE]

I would say that either the bypass rod isn't releasing or you have much bigger issues.

 

[Darrell3958]

I would say that either the bypass rod isn't releasing or you have much bigger issues.

I took out the battery and can feel the rod going back and forth. It feels it is hitting a notch when it does this

 

[StarTech]

Without the model number it kinda hard which transaxle you have.

You might have with keyed axles and you just replace a wheel. But most late model Cubs do have Double D axles.

 

[Darrell3958]

Without the model number it kinda hard which transaxle you have.

You might have with keyed axles and you just replace a wheel. But most late model Cubs do have Double D axles.

it is a 2015 model 13WPA1CT009

 

[StarTech]

XT1-LT46 (13WPA1CT009) appears to use the Tuff Torq K46DM series Hydro with Double D axles so my thought is out the window.

Try raising the rear end and see if both wheel will spin the same direction at the same time.

 

[Darrell3958]

XT1-LT46 (13WPA1CT009) appears to use the Tuff Torq K46DM series Hydro with Double D axles so my thought is out the window.

Try raising the rear end and see if both wheel will spin the same direction at the same time.

will try tomorrow.

 

[Tiger Small Engine]

will try tomorrow.

So are you saying when you start the engine, and engage the forward/reverse pedal or handle, the mower does not move? Or is just the bypass rod in either position (in or out) and the riding mower rolls. Big difference.

 

[Darrell3958]

So are you saying when you start the engine, and engage the forward/reverse pedal or handle, the mower does not move? Or is just the bypass rod in either position (in or out) and the riding mower rolls. Big difference.

yes when I start it and push either forward or reverse nothing. Also the bypass rod in either position the mower rolls

 

[Richard C]

Try changing the transmission fluid if that doesn’t work you probably have faulty hydraulic pumps
had a similar problem and had to open up transmission and found broken springs in pump replaced them and all worked ok