Search results

I purchased a used Kubota ZD331 with a 72 inch mowing deck. It had seen some hard times which took a lot of work to fix. Now I am trying to replace the fuel filters. However, it appears the previous owner may have modified that system. Per Kubota, there should have been two paper filters to...

H, thanks for taking a moment to read this.... I just purchased a 2012 used ZD331 ... after reading the manual, it appears you are supposed to adjust the cutting height using the Cutting height Control Dial. My understanding is use the hydraulic controls to raise the deck, dial in the height you...

Hi and thanks for taking a moment to read this. I have a 1995 721D with a left frozen transmission. It froze up about 100 yds from my storage area on the last mow of the season last fall. The engine runs great. I contacted the dealer who says the transmission is no longer available. I don't know...

Hi, and thanks for taking a moment to read my post. I have a 721D on which the right wheel appears to be slipping. It will eventually catch up but the problem seems to be getting worse and I am concerned it's getting to the point where I will get stuck with only one wheel working. When I...

After powerwashing my Simplicity Landlord tractor last weekend I was unable to get it started.. I thought it needed to dry out and I left until this morning, on the charger, and it still won't start... when I was trying to troubleshoot it I found a wire loose but don't know where its supposed to...

i mowed my lawn with my 721D with the 9361 deck.. everything went well and I did not see or hear any problems. However, when i removed the deck cover to blow out and clean the inside area after mowing, I discovered one of the idler wheels had essentially been destroyed from the inside out.. by...

I was hoping that the new bar tires I had put on, would be somewhat gentler on my lawn when I made a turn. But they aren't. No matter how slowly I make the turn, the wheel that is pivoting makes a divot in the lawn... I was thinking about buying regular turf tires but the OE ones are really...

The previous owner of my 721D replaced the transmission on one side of the mower last fall. As a result of that, or something else, if I push both control arms completely forward, on a level surface, the left side spins faster than the right side... is there a way to adjust one, the other or...

I replaced the fuel solenoid on my 721D earlier this week, thanks in no small part to the help KennyV provided. After I finished, it started up perfectly several times the same day. Two days ago I went to start it for the first time since that repair. While the engine turned over it did not turn...

I have a 9361 mower deck. I noticed yesterday that the deck is not level. The left side appears and measures lower than right side by almost an inch! The deck mount arms are in the same location on each side. I just replaced the two front wheels on the deck with the no-flat tires. I can't say...

Hello again, Sorry for all my questions but until I am more familiar with the "ins and outs" of this machine I thought it better to ask before then after... the previous owner told me that the way he shuts the motor down on the 721D was to back the throttle all the way and then turn the key...

Hello, Was just wondering how those GH owners without a Powerfold deck, access the underside of their decks for sharpening, cleaning etc... I had just purchased the MoJack about a month before I got my GH. Unfortunately, the front deck tires are spaced too wide apart for me to use the Mojack. I...

Hello, I recently purchased a 1995 721D and am trying to make it as stock as possible. The previous owner replaced the stock switch for the headlights, which is a rocker type switch, with a metal toggle switch. In doing so, he also had to put an ugly homemade piece of metal to cover the larger...

Hello, I just purchased a used Grasshopper 1995 721D with a 9361 mowing deck. I have the owners manual but there are some questions I still have. I read somewhere on the web, that even a non hydraulic deck can be "flipped? if done manually. Does anyone know if this is true and if so, how to do...