Search results

Friends -- I believe I heard that an SB14 blade adapter (Part # M114679) would fit on a JX75 machine in lieu of the BBC. Can anyone confirm this? If so, I need to buy one so I can get this machine going! Thanks

Thanks JoeM and StarTech. I'm going to remove the BBC, since I don't really need it anyway. I'll try to sell the BBC Cable and activation lever == which is way expensive new -- about $140!

Hello; I just picked up a JE75 mower, Serial # 035298, with a DOM of 061500 (which I interpret to mean June 15, 2000. The previous owner hit a rock and broke the lower BBC clutch piece, and I mean he broke it in half when I took it off today. Engine seems to run fine, no vibration at all but...

Thanks for these responses. I'm pretty confident these pins are pressed in, so what I wanted to do is remove the metal gear off the bald tires, and put the gear on the other wheels that and use 3 bolts to hold the gears onto the wheel. The challenge is prying the pins off and not breaking the...

I've got a nice Toro 16785 front wheel drive mower with a 2 stroke engine. Back wheels have plenty of tread, and the front wheels are bald. I'm thinking of swapping the metal drive gears from the back to the front...but the pins holding the gears to the wheels are doing their job well. I don't...

Thanks StarTech! I'll need to take one of the bearings to Napa or some other store to get the ID and OD since I don't have a set of calipers. I'm guessing your correct as to the 1/2 ID ones you posted. Update: I was able to get a set of calipers at NAPA and confirmed 1/2 ID and 1 1/8 OD for...

Hello; I've got a 2008 Cub Cadet walk behind mover, Model 12AE18M3056 that has good tread on the front tires, but the wheel bearings (2 per wheel) are shot. They have a flange to butt them against the plastic wheel body, and the spindle fits through both inner and outer bearing before thre nut...

Thanks Rivets! That's probably gotta be my next step.

Hello; The small jet on my 2-stroke snowblower is lost, and I need a replacement. I can't find a part number, but do have a graphic of the part. This is off a Tecumseh Model TH098SA and I believe the carb is # 640092A 5261. The jet is #20 in the attached graphic. Does anyone have a part...

Thanks for the quick response. After I posted my question, I went out and put the rubber disk on the driveway and let it get hot, which increased it's stretch-ability. I was able to then put it onto the plastic wheel after that. I'm guessing your plan will also work!

Hello all; I've got the replacement rubber, yet am wondering if anyone can guide me on how to put the new rubber disc onto the plastic wheel? There is not enough room between the body and the hex shaft to take the plastic wheel off the shaft, so I either have to rotate the rubber onto the...

Thank you Rivets! I'm gonna have to call them, because the tag on my mower only has my model as 34345, with a serial number of 343451105618.... The Troybilt site indicates that the model number will start with either a 11 or 12.....

Anyone know where I can get an Operators or Repair manual for this mower? I need to replace the drive disc and blade (both of which I have the part numbers). The mower is from 1998. Thanks much.

Thanks Scrubcadet10 and tom3; When it would die, it would sputter then die. I would quickly check the fuel filter and see gas there, so I would then hook up my spark tester and check for spark. This afternoon, I checked the valves and made slight adjustments. Then I started it and it ran for...

Got a engine model 122607 0118 on a Toro 20039 mower that starts easily, runs for about 25 minutes and then stops. Has gas, as I can see plenty going through the filter, and I've already rebuild the carb, and checked the float for pin holes. Already replaced the gas cap. Has spark after it dies...

Following up for everyone's benefit. I was able to find a parts diagram on Jacks Small Engines site. So the part numbers for my specific mower are: Disc Drive: 74150VE1G02 Drive Disc: 75141VE1G00 Clutch Spring: 75183VE1G01 Cost about $55 total, so hopefully this will help solve my BBC issues...

Hello; I've got the above mower that sequels when you activate the Roto Stop Lever, and then once the blade is engaged, the Roto Stop lever will not stay engaged/blade will not stay engaged. So essentially two issues: possibly a worn clutch, hence the part number request, and secondly, the...

Hello; I have a Toro 20331 mower (this is the front wheel drive model) that has a bad engine, which I need to replace. The engine that came off of it is a B&S Model #: 124T02-0203-B1; Serial 08091156. What I'd like to do is find a used engine to swap onto the mower. Does anyone know whether I...

I'm not too impressed with the JD mulching blade (GC00344) and would like to move to a Gator, Ninja or Predator mulching blade. The challenge is the 3 mounting holes in the blade and blade adapter. I don't want to use a Gator G6 commercial blade, as it's heavy for this walk behind mower with 6...

Hello; I have been gifted a John Deere GXJS63D111073 mower that needs both cables that run from the right hand side of the handle to the transmission. I sense the Transmission Cable which has the spring on the end is part # GC90045, and the Traction Control Cable which has the 3 speed selector...

The engine codes as 1981, yet I can't find any model number of this 20 inch cut mower. I need a new drive belt for it, and am looking for a part number... Thanks,

Here's the picture of a Honda HRT2162TDA I just received today. Do ya think the exhaust value has been out of adjustment, based upon this wear? Any change to fix this without replacing the whole engine? Could this area be sleeved?

I've got a HR215 mower that I received with a bent crank. I found another engine off of a HR214 that I've transplanted onto the deck....having difficulty getting it started, so thought I'd check the valve clearance. The is an OHV engine. Anyone know what the clearance should be for the intake...

Here's a photo of what I'm looing for:

For a Toro 22035 Commercial mower, from 1990. Gas tank part number is 71-9010 or 17-4909. This unit has a bagger, so not just any tank will work....the original is about 10" in length, 7" tall and about 4" wide. The width is the biggest concern... Anyone have one? Greg

The kill wire is working as it should....right?

I have a Toro model 20444 that I can't get to start. Here's what's happening to this B&S engine, model # 127802, Type 0640-01. Even when I pull the recoil, I can not get it to fire, other than an occasional/rare pop. I have spark, and know gas is getting to the plug. The pop indicated that I...

Hello -- I'm looking for rear drive wheels for a Toro 20684 mower -- part # 14-9959 or 11-9519. These are on a 1986 Toro mower. Anyone have two with tread? I unfortunately broke one of the drive gears trying to pull it off with a puller....and now even though the mower still drives, there is...

I have an HRS2162PDA that certainly needs a new blade. It only has one on it now....and I believe the correct blade number is either: 72531 VE2020 OR 72511 VG4K00 If I currently only have one blade, which one should I get for a replacement?

Looking for Toro part # 81-2040 as my recoil on my Toro 2 cycle 20321 broke yesterday. Anyone have one? It is round not square. Greg

Need some advice on this free Honda mower I inherited. Serial Number M2CG-6703446. I like it's light weight, even though it has a steel deck. Engine runs well, except some idle surging, which I hope to clean out with Seafoam. I have two issues: First, I have no backwards movement ability...

OK, I've a B&S engine on a Craftsman mower. The engine is model # 128602 0304 E1. Got the unit off of Craigslist, because it would not run. Got it home and cleaned it up, and got it running (pretty easily). Had a serious vibration, so looked at the blade and it is evident the blade hit...

I can't find the model number anywhere on this mower. Any help please? http://i.ebayimg.com/t/Toro-2-Stroke-Suzuki-With-Bagger-/00/s/MTIwMFgxNjAw/z/G7kAAOxy0aBRn6CS/$T2eC16RHJGsFFMueyWTiBRn6CR6N!g~~60_57.JPG