Any of you folks sell Lawn boy parts? I need a trailing edge 107-3904 and rear bag 107-3911 for my model 10685 sn=260001795 2003.
This is a great mower! Starts on the first pull.
silver1
I have this stud that came with a B&S 6B-S. The oil bath air cleaner uses this stud to attach it to the carb.
I don't think this is correct for this model. I don't know why it is factory bent! What B&S would it be for?
Thanks,
Silver
My Kohler CV13 carb. leaks after shutoff. I got the needle and seat kit. 12 757 03-S
Walbro LMK 63 0217 1205377.
The info. says to "Drop enclosed valve seat into retainer with identification marks facing down" (84-215)
"Press retaining ring with a .213 dia. drill blank...
I have a JD STX 38 that purchased over the winter. The Black deck is fair condition but was missing the pulley cover.
I got a cover. My question is....What hold the cover on? Three bolts with nuts? What size? A picture would do.
JD STX38 5-speed CV 13 21509 SN=27044516 252 Moo stx H301526...
Where can I find the parts manual with John Deere parts numbers? I have the service manual. I also have the 338 page manual in PDF format. They have numbers that are not part #.
Thanks
I purchased a JD STX38 rider in the spring. After a clean up and check out, I mowed my front lawn.
The grass did not exit out the side much and left a trail behind me. I removed the cutting deck(Black)
check it out and found it had a mulch kit installed. I need to remove those parts and...
I need to order some body parts for my CV 135 21509 model STX H301526 Sn 2704516252.
in need the gear shift cover, throttle, seat,gas cap, clutch pedal rubber cover and throttle cable.
Thanks, silver1
Picked up this John Deere STX 38 today. It has a 13 Hp. motor that I will need to learn.
I could use a parts manual. It is 20 years old. I'll get the numbers after I get it out of the truck.
Has anyone made a bench motor starter to help start older recoil start engines?
I would like to use a electric motor with belt to start older engines that on my bench.
Using the pulley that is on all the 2 - 3 Hp engines I have from mowers or edgers
Just hate to pull and pull and pull. Not good...
Can I substitute coil 398593 or 496914 for old coil 298502 or do I need 591420 replacement kit?
What about the kill switch wire to carb.. Time to update from points.
The muffler was toast. Only thing holding it together was the rust. I moved the lock nut, but the pipe will not move. I hit it with PB blaster, but no help.
I can't get a pipe wrench to hold.
I do not have a heat source. Any Help?
silver1
What is the best way to lube the spring on a 2 hp 3 hp briggs?
I have the spring clean, but not the housing. I will clean it and
install the spring and rope. I believe these take about 6 turns.
I heard somewhere that auto-trans fluid worked ok.
Should it be a spray type lube or just some oil...
I just picked these up today. More old Briggs to get running and refurbish.
I don't see a lot of McLane's on the Forum. $45.00 for both. The old edgers
are almost obsolete!
Silver1
I got this yesterday. I needed a self propelled mower and this is like new!
Runs good, looks good. My wife will love it .:smile:
I have a bad back that will need surgery soon. I have not mowed sense
last May! I had a high school kid cut it all summer for $25.00 a week.
Now I have the Lawn...
I need a sector gear from one of you nice people that have a ton of spare units.
The info I have is part# APY-100508L. Craftsman riding mower. 917.255370.
Please help before I crash!:confused2:
Look at the photos and tell me if the LONG pickup tube can be replaced.
It is brass and plastic. I only see the plastic part listed. Help!
It is off a B&S 3.0 HP. 080202 0520 02. Thanks.
My rope broke on my Yard Machine. What is the correct length of the rope to exit the shoud?
It looks like the old one was 6 feet(it did not go to the handle). How many turns on the recoil for correct
tension? I think I read 6 turns.
Thanks
I have injured my L4/L5 and spent 5 days in the Hospital. I will have 3 months of rehab..
I will now need a lawn pro to help on the front and back yard of about 3000 sq. ft.
I have EZ access to both yards and have a walk-behind and 30" rider. It will need to be
watered also.
What would be a...
On a good carb. can these brass tubes be removed?
As you can see this one is not in good shape. I don't see the brass tube as a part,
only the plastic lower part.
Thanks
LB
This winter after a good snow fall I removed the snow from a 2ft x 4ft part of my lawn to give my dogs a place to go in the grass.
Now the area is yellow and every thing else is green. What would be the way to get this back in shape?
I just picked up my second 20" Homeowner. Not to much info. out there on these.
3 HP B&S 80202 0520 02 79031901.
I have another coming May 1. Made from 1968 to 2004.
They are more like a "run" behind
I got a power washer for free with a running 140cc OHV engine. What is the HP?
I can't find any numbers as yet, some help please. It looks to have a 13/16 Vert. shaft.
Any info. would be nice. it doesn't pump out any water at pressure. I will scrap the pump.
Thanks
Lb
I could use the user manual for Sears Trac Plus 5/24 536.884822 code 325210245.
Year and info. like that also. No Snow out here this year. I got this for $40.00 with
rebuilt carb. It is in great shape. I'll try and start it soon.
Thanks.
LB
I have posted a number of times about my 6B-S motor.
I model/type/code/ with the type cutout of housing.
I'm wondering if housing has been swapped?
What is the bore and stroke of a 6B and an 8B?
LB
Clockwise or counterclockwise? Best way to do it.
I'm going to re-purpose the v-pulley.
OH Guys
BACKUP.........................I'm not putting it on a SNAPPER..........I'm going to put it on a Craftsman.
I have a 1955 California Trimmer with a 2 Hp Briggs. I'm looking at the manual and it calls for 20-20w oil above 32F and 10w below 32F. I don't think
I will be mowing the lawn below 32F. I remember 1955. No self serve then. Full service, sometimes by two people.
Is that true with "todays"...
My small front lawn is over 20+ yrs old. I have never thatched it as I used catcher on my walk behind.
Now I will be using a rider with no catcher. In general should a lawn be thatched every year? I leave
the grass tall in late summer to help with the watering. Our local nursery is advising...
I have craigslist add for a yard tractor that we don't know how made it.
Could be one of a kind. It has B&S opposed horizontal motor but vertical rear end.
Rear wheels are 5 bolt and it has a 4speed with rev. The paint is green and yellow.
Had a deck...
I got this today and would like to have any info. you may have on it.
Motor Model ACN SN= 2750997 Size 2 5/8 X 2 3/4 Spec. 120866 Wisconsin.
Jacobsen 30 in. PARK 30 Sn 1730-9Z96.
No idea what I should do with it!
I have a MTD or Weedeater walk behind that will start when pumper/primed and I can keep it running by pumping the bulb
on the carb. It does have a bowl on the carb. but hard to get to. Does it have needle and seat? The fuel tank leaks at
the seem by oil fill. What is a good sealant?
120602...
Morning,
My neighbor gave me this 5 HP Briggs & Stratton off a rototiller as it would not run.
He replaced it with a Harbor Freight motor. Model 130202 3166 01 code 90011227.
I removed the cart./tank and cleaned it all up. Removed rust from inside the tank with
cider vinegar. the owner said...
I would like to replace the idler pulley on my Sears 11 36 (917.255370) rider. It makes a lot of noise when the clutch is released.
I do not have the deck on it. The sears part is APY 1649J or 105307X. They want over $40 for it. I found one by ROTARY for $15.75,
but I do not have any info on...
What do you pros use on the bolts to keep them tight?
My starter on the TEcumseh 10hp almost fell off. :tongue: The
right side bolts are hard to get a wrench on and they have
star washers.
Thanks,
LB
I picked this unit up from a neighbor down the street for $40.00.
It had not run in sometime and had been left outside to rot.
It needed 2 rear tires, a new chain, and a new carb. The gas tank
was very hard to get clean and the carb. was full of dried gas slug.
The Tecumseh 10 HP was in shape...
I have a plastic tank on my Tecumseh that seems to have been abandoned with a lot of gas in it.
I have used the usual cleaners but it is still not clean and turns the gas brown.
What is the most effective tank cleaner? I have apple vinegar in it now. I will rinse with isopropyl
alcohol.
I would like to have a part number of the carb. for this engine.
I come up with 632991. The manuals that I look up the part show a different
bowl with high speed adjustment. The one on it does not have this
type bowl. I will get a new one but I want to get the correct type.
I have a 640078A...
"governor may need to be adjusted for the static position"
I an having a problem with governor adjustment. I do not
understand the static position. Any pictures or GOOD diagram
of the adjustment? I have tried nine ways from Sunday and
can't seem to make it work correctly. Over rev and no...
I have a carb. that seems to be a replacement. The top half is the same a new 632991, but the bowl and high speed
adj. are different. I have a 640078A coming which is for the TVM 220-157069E. The choke is different on that. Can I just swap
choke shaft/blade? 143-346062
LB
Thanks to all the...
After playing with my second Tecumseh 10 Hp. engine I can see why they went out of business!
Their carburetor and governor linkage suck. The first was a VM100 and the second is a TVM 220.
Both have the same governor setup and the carburetors are almost the same but the TVM 220
does not have the...
I pickup this 10 30 up and need to find out about it.
502.256172 is the sears # Has a Tecumseh 10 Hp.
143-346062. I may need a flywheel assy. as the plastic
fins are braking off from sun rot. Both rear tires are bad.
I really need a manual for it. I found an old ad for a 1969
that is a...
What would this be called? Just 10 30? I picked this up today. It will be a better match for my lawn.
I will need a manual....Parts and operation. It "ran" 3 years ago. Draining the oil and will clean it up after
getting the wheels off. Has the KEY :thumbsup: It has a Tecumseh engine...