Latest activity

I took the threaded nob things off the handle bars. but do i need to move some other bolts as well? with the nobs removed the channel...

Thank you.

Here is a wiring schematic for your unit. If you notice the seat switch has a double contact setup, so simple testing with an Ohm meter...

Thanks, but you're not understanding what I am saying. I read pg 15. If the operator is not present the seat switch should kill the...

I bought a used super recycler with the 163cc engine, cleaned the carb, cleaned the fuel tank, replaced spark plug and air filter, and I...

I bought a used super recycler with the 163cc engine, cleaned the carb, cleaned the fuel tank, replaced spark plug and air filter, and I...

Front 11x4-5 4 ply rear 18x9.5-8 4 ply

are you saying your machine is a "Husqvarna CZ4817"... ? if so - Detailed Specifications: Engine: 17 HP Kawasaki V-twin engine with...

Original tire spec's - - - Front tire = 410/350-5, 4 PLY Rear tire = 18x9.5-8

4.10/3.50x5 is approximately 11 inch in diameter. So maybe narrower than the spec'ed tire but same height.

Hmmm. Looks like tire size is not the reason I can't get my deck level. I don't think I can justify replacing the tires just to...

4.10/3.50x5 is approximately 11 inch in diameter. So maybe narrower than the spec'ed tire but same height.

Original tire spec's - - - Front tire = 410/350-5, 4 PLY Rear tire = 18x9.5-8

Hi slomo, There are as many good videos as there are bad out there on the web. Some are just idiots trying to BS their way through...