Latest activity

StarTech, luck that shock did not fry you like chicken in deep grease, I actually removed the kill wire and tested one to fire on the...

Hi: I have a new cc800. It runs and mows as expected;but, the gears are hard to find and it frequently pops out of gear. Before I take...

Hi: I have a new cc800. It runs and mows as expected;but, the gears are hard to find and it frequently pops out of gear. Before I take...

airdriver, I have several Turf Tigers up to the 72" they are hard to break but what you have I would say if a clutch problem, I have a...

Per your date code, use RTV on the valve cover rather than a gasket.

3600 RPM max, usually adjust to around 3250 RPM. 4800 and engine will blow in short order.

I know. START WITH THE BASICS FIRST!

You would be better off taking it to the dealer because it is brand new and under warranty. Drive belts should last for several years.

I have a hayter r48 recycle mower with 850 series engine would the 500 series engine fit?

Unless you're going tto trash that motor, find out why the rods bent. Examine the valves and rockers. Are they way out of adjustment...

Should have done this straight away.... PULL valve cover, low and behold there is a problem Houston... thanks for all your great info...

If you replace the engine on the older John Deere, you have just about spent 100% or more on engine and labor of the value of the mower...

It was either vapor locked or the fuel filter.... Runs like a champ now... Pretty freekin' embarrasing.... I was on the phone with...

Yup and next thing to check would be the coils and the battery. How old is the unit? Battery could be bad under load. Put a...

For most V-twin applications I use Champion RN12YC or RN14YC and have not had issues with them in years. The ones I do not like just...