Latest activity

Did my reply happen, having trouble sending info.

Replaced fuel filter... Checking wiring. Could not find where fuses are (was told by shop that could be a problem--- located under seat...

Does anybody know what tool 4282 890 2700 is used for?

Total cost including tax for the new Z325E-54" cut was 2894.65 out the door. It was 30% off if you filled out a credit app and you were...

Thanks. I researched the push rivets last night and problem solved. What a terrible design with the fan screen oversized to hold down...

My SCAG Patriot, 23 HP Kohler, did the same thing after 140 hours. Long story short, the spark plugs were dirty. Cleaned them on bench...

I removed my Hydro gear from my Troy Built RZT50 and turned the drive unit upside down with both the plugs removed on a 5 gallon bucket...

milky looking oil means it had water in the hydro.

I'll do that. Thanks.

I swapped out the Kawasaki FDV590 water cooled for a new Honda GSX 630 air cooled. Everything runs like it should after some effort...

Those plastic fasteners [92039] are supposed to removable and usable. Just pry up the center pin to release them. Under that plastic...

I believe that Bad Boy has a elect. operated fuel valve at the carburetor . Those sometimes click when the key is turned to on and off .

I believe that Bad Boy has a elect. operated fuel valve at the carburetor . Those sometimes click when the key is turned to on and off .

Compression release problem solved. I carefully double checked the valve lash again and it was a little too lose. I guess it doesn't...