Latest activity

You say from post #18: The seat switch has been unplugged for years now. AND Lets be a little bit reasonable That is what caused the...

I agree, but also believe that people should be responsible for their own actions. So unless the equipment failed and caused the...

A resistor or a diode? what was the number of the part you used and source? I'm sure there will be other folks who run into this kind...

Hi Go Cart Builder, You're supposed to only tighten bolts 1/4 turn before they break. LOL Anyone who has worked on this stuff expects...

yes i was tightening it and it just sheared off im a rookie at this stuff just bougth the engine unworking second hand from the tip for...

sometimes the rim rusts in a spot where air can escape , tire still good , remove tire clean up rust on inside of rim , repaint rim...

rust on inside of rim where seats. Like all others submergs completely and place a weight on it. bubble will show. If rust, take off...

Last resort...Find a tub big enough to completely submerge the tire and rim assembly. Then fill the tub completely with water. This will...

Let’s see it.

Mulching never works better than letting the grass fly out of exit chute. Preferably with the plastic grass shield up so the grass can...

Just wanted to say hi. 13 pages for a tire leak is pretty gundy.

I obviously know the difference between an L-head engine and an OHV engine. I said that early in the thread when he was describing things.

The trend of no drain plug started over 20 years ago. with some of the mowers not having access to the drain plug due to deck design...

The trend of no drain plug started over 20 years ago. with some of the mowers not having access to the drain plug due to deck design...

I have a TroyBilt TB280 ES with a B&S 725EX engine (model 128M05-0012-F1). Just for a sanity check, can anyone confirm that there is...