Latest activity

Blade bolt can be tight but if keyway is worn the blade can still rock, I have seen it.

Could be coil and or plug. Could be a counterfeit plug in that hole. See if you have over say 5k Ohms on the fouled plug.

Remove the top engine cover, then unplug the single wire on each coil. That is a coil kill wire that has a diode for each coil made into...

Just wanted to say hi. 13 pages for a tire leak is pretty gundy.

Not if the blade bolt is tight. All that should tighten when you overtorque the blade bolt with your impact gun. Bolt only needs a rough...

Is it possible the blade adapter is loose?

This is appearing to need and engine. Small engine warehouse is a good source, but they are not cheap. You may be better off shopping...

Thank you all for your response! I have been able to check out a fair amount in the meantime. The blade is definitely not bent, there...

Lets be a little bit reasonable, If you are stupid enough to be run over by the turning deck maybe its better that they don,t produce...

The way the circuit works normally is you push the dash button and then switch into reverse. Then you can let go of the button. The...

I agree, but also believe that people should be responsible for their own actions. So unless the equipment failed and caused the...

Anyone add the mulch kit to their cub cadet zero turn? If so does it work well?

Safety switches: WHY You asked: Why so many safety switches, are they really all that neccessary? Can I just disarm them? It's your...

The button won't let back up with blades engaged

"New" aftermarket carburetors often come with junk anti backfire solenoids. Some of them can be modified by just clipping off the...