Export thread

X380 fault code 9000.

#1

L

lpfam11

Have a X380 that will not start. We ran the on board diagnostics and it keeps pulling up a 9000 code which is “reverse pedal pressed”. The reverse pedal is not pressed and even tried pressing the forward pedal to pull the reverse pedal up. Still has the 9000 code no matter what we do. Looked for pedal sensors but do not see any. Any ideas?


#2

M

mechanic mark

John Deere Select Series X330, X350, X354, X370, X380, X384, X390 and X394 Lawn Tractors (SN: 010001-110000) Technical Manual (TM138119) download / DeereManuals.com

This document covered:</br>Lawn Tractor X330;Lawn Tractor X350;Lawn Tractor X354;Lawn Tractor X370;Lawn Tractor X380;Lawn Tractor X384;Lawn Tractor X390;Lawn Tractor X394; instant download / DeereManuals.com
www.deeremanuals.com www.deeremanuals.com
Either purchase Technical Manual & troubleshoot & make repair or take to Dealer & let a Factory Certified Technician make repair for a small fee.






7


#3

B

bertsmobile1

Reverse sensor is generally on the rear axel and will be wired in with the seat switch so follow the seat wires under the rear guard.
The switch & how it works will be obvious
And a triple + to Marks suggestion about buying the JD tech manual


#4

StarTech

StarTech

Except in this case the switch is on the forward/reverse assy. Probably in or under the operator's tower.


Footer Links 1

Top