Export thread

Won't crank/ no fire

#1

V

victoriffic

I have a 2007 Scag Wildcat, which has been a perfect piece of equipment untill now. After sitting in the barn all winter, the original battery was dead. I jump started the engine (26 hp Kaw ) and it started right up. When I disconnected the jumper cables it died......after that it will not crank nor is their any spark when I jump across the starter with the key on.
All the interlocks check good, I found a diode on the wiring diagram and finally found it buried in the wiring harness, it test good. The starter relay is good and I even swaped it with another to verify this.
Grass is 12" tall......Help


#2

K

KennyV

Are you saying it is not working with the dead battery... but did work while you were connected to a good battery?? :smile:KennyV


#3

Briana

Briana

Hi and WELCOME to LawnMowerForum!! I have moved your thread to the Small Engine & Mower Repair Forum. You'll have better luck getting assistance there. :thumbsup:


#4

J

jeff

Does it have a fuze?


Top