One day, ...... if you don't already know........you will learn, lawn equipment and water ....are NOT compatible ! replacing bearings, spindles ,bushings, pulleys, etc. becomes expensive ! even if you just wash your equipment on a nice day, use a blower or air hose to clear off as much water as possible, especially the deck ( don't forget the tops of the pulleys ) and the transmission pulley too, and wash out the BOTTOM of the deck too.. decks are notorious for rusting through from the bottom -up because of clippings and mud stuck underneath.. Of course if you have a money tree in the yard , then who gives a diddly squat !! I've been there, done that !! best of luck ........ boobala :mur: :mur: